[Sat Oct 15 17:48:12 2011] Detection parameters:
  Position = (408.7, 731.5) = 14 18 18.39 52 43 56.2
  Extent = 2.1" x 1.1", rotation angle = 107 degrees
  Source counts = 49.0 +/- 7.4
  Background counts = 6.0
  Rate = 0.002 +/- 0.0003

[Sat Oct 15 17:48:13 2011] Off-axis axis estimate = 6.95'
[Sat Oct 15 17:49:01 2011] Using EEF radius (= 2.15 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:49:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 17:49:01 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Sat Oct 15 17:49:01 2011] source mask rpix=4.4, npix_max = 95, mask sum = 90, frac = 0.946
[Sat Oct 15 17:49:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.15"
[Sat Oct 15 17:49:02 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 17:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 17:49:02 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 17:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 17:49:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10769_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:49:02 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 17:49:02 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 17:49:02 2011] Fit fullrun_ccd0_acisf10769_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 15 17:49:11 2011] Spatial fit model total counts = 54.959500, observed total counts = 55.000000
[Sat Oct 15 17:49:11 2011] Offset between fit and detection position for source 3 = 2.158203 pixels
[Sat Oct 15 17:49:11 2011] 54.724700 total counts/ 12.769400 bgd. counts: snr = 11.740905
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.158203 pixels
  Position = (408.2, 733.6) = 14 18 18.44 52 43 57.0
  Extent = 1.7 (1.2-2.6)", rotation angle = 0
  Source counts = 42.0 +/- 7.4
  Background counts = 12.8
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 17:49:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 17:49:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 17:49:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 17:49:11 2011] Source does appear to be extended
[Sat Oct 15 17:49:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 17:49:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:49:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 17:49:31 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Sat Oct 15 17:49:31 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.980
[Sat Oct 15 17:49:31 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.74"
[Sat Oct 15 17:49:31 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 17:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 17:49:31 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 17:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 17:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10769_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:49:32 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 17:49:32 2011] fullrun_ccd0_acisf10769_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 17:49:32 2011] Fit fullrun_ccd0_acisf10769_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 15 17:49:39 2011] Spatial fit model total counts = 48.661800, observed total counts = 50.000000
[Sat Oct 15 17:49:39 2011] Offset between fit and detection position for source 3 = 0.541280 pixels
[Sat Oct 15 17:49:39 2011] 49.660600 total counts/ 16.458500 bgd. counts: snr = 8.184091
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.541280 pixels
  Position = (407.7, 733.9) = 14 18 18.47 52 43 57.1
  Extent = 1.4 (1.1-2.2)", rotation angle = 0
  Source counts = 33.2 +/- 7.0
  Background counts = 16.5
  Rate = 0.001 +/- 0.0003
[Sat Oct 15 17:49:39 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 17:49:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 17:49:39 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 17:49:39 2011] Source does appear to be extended
[Sat Oct 15 17:49:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 17:49:59 2011] Not overwriting source region fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 15 17:49:59 2011] Extracting stamp from image fullrun_ccd0_acisf10769_pi14-548_cl_sm2.00.img.gz, (342, 668) - (473, 799)
[Sat Oct 15 17:49:59 2011] Writing fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3.gif
[Sat Oct 15 17:50:07 2011] ../../acisf10769/products/events/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.evt and ../../acisf10769/products/events/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 15 17:50:07 2011] Size of ../../acisf10769/products/events/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.evt.gz[events] = 49 counts
[Sat Oct 15 17:50:07 2011] Mean chipx,y = (323.80, 743.59)
[Sat Oct 15 17:50:07 2011] Mean tdetx,y = (3804.59, 4808.20)
[Sat Oct 15 17:50:07 2011] chipx,y range = (300.00-344.00, 725.00-763.00)
[Sat Oct 15 17:50:07 2011] Size of ../../acisf10769/products/events/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 52 counts
[Sat Oct 15 17:50:07 2011] ../../acisf10769/products/images/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.img and ../../acisf10769/products/images/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 15 17:50:07 2011] ../../acisf10769/products/spectra/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.pi and ../../acisf10769/products/spectra/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 15 17:50:07 2011] Not generating rmf since there are only 33 counts
[Sat Oct 15 17:50:10 2011] ../../acisf10769/products/lightcurves/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.lc and ../../acisf10769/products/lightcurves/fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 15 17:50:43 2011] 177.871
[Sat Oct 15 17:54:22 2011] Updating aperture counts using extracted products
[Sat Oct 15 17:54:22 2011] Error reading totcts from fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 15 17:54:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 17:54:22 2011] Using photon index=1.80, rate=0.00124, arf fullrun_ccd0_acisf10769_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 17:54:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 17:54:22 2011] Updating source flux to 1.7e-14
[Sat Oct 15 17:54:26 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting