[Sun Oct 30 16:26:03 2011] Detection parameters:
  Position = (310.6, 429.0) = 5 46 19.48 -0 5 19.9
  Extent = 1.4" x 0.8", rotation angle = 1 degrees
  Source counts = 126.1 +/- 11.7
  Background counts = 10.9
  Rate = 0.006 +/- 0.0006

[Sun Oct 30 16:26:04 2011] Off-axis axis estimate = 5.18'
[Sun Oct 30 16:26:50 2011] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:26:50 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Sun Oct 30 16:26:50 2011] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Sun Oct 30 16:26:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.25"
[Sun Oct 30 16:26:51 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 16:26:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:26:51 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 16:26:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:26:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10763_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:26:51 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 16:26:51 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:26:51 2011] Fit fullrun_ccd2_acisf10763_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:26:59 2011] Spatial fit model total counts = 128.373000, observed total counts = 129.000000
[Sun Oct 30 16:26:59 2011] Offset between fit and detection position for source 3 = 0.998322 pixels
[Sun Oct 30 16:26:59 2011] 127.025760 total counts/ 3.965760 bgd. counts: snr = 61.795051
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.998322 pixels
  Position = (311.3, 429.7) = 5 46 19.47 -0 5 19.8
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 123.1 +/- 11.3
  Background counts = 4.0
  Rate = 0.006 +/- 0.0006
[Sun Oct 30 16:26:59 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:26:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:26:59 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:26:59 2011] Source does appear to be extended
[Sun Oct 30 16:26:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:27:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:27:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 16:27:19 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Sun Oct 30 16:27:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Sun Oct 30 16:27:19 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.22"
[Sun Oct 30 16:27:19 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:27:19 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:27:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10763_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:27:19 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 16:27:19 2011] fullrun_ccd2_acisf10763_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:27:19 2011] Fit fullrun_ccd2_acisf10763_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:27:26 2011] Spatial fit model total counts = 130.513000, observed total counts = 130.000000
[Sun Oct 30 16:27:26 2011] Offset between fit and detection position for source 3 = 0.135662 pixels
[Sun Oct 30 16:27:26 2011] 128.139400 total counts/ 17.626400 bgd. counts: snr = 26.322768
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.135662 pixels
  Position = (311.3, 429.8) = 5 46 19.47 -0 5 19.7
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 110.5 +/- 11.3
  Background counts = 17.6
  Rate = 0.006 +/- 0.0006
[Sun Oct 30 16:27:26 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:27:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:27:26 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:27:26 2011] Source does appear to be extended
[Sun Oct 30 16:27:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:28:37 2011] Not overwriting source region fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 30 16:28:37 2011] Extracting stamp from image fullrun_ccd2_acisf10763_pi14-548_cl_sm2.00.img.gz, (262, 380) - (361, 479)
[Sun Oct 30 16:28:37 2011] Writing fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3.gif
[Sun Oct 30 16:28:44 2011] ../../acisf10763/products/events/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.evt and ../../acisf10763/products/events/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 30 16:28:44 2011] Size of ../../acisf10763/products/events/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.evt.gz[events] = 132 counts
[Sun Oct 30 16:28:44 2011] Mean chipx,y = (19.24, 420.95)
[Sun Oct 30 16:28:44 2011] Mean tdetx,y = (3481.95, 4066.76)
[Sun Oct 30 16:28:44 2011] chipx,y range = (2.00-36.00, 399.00-441.00)
[Sun Oct 30 16:28:44 2011] Size of ../../acisf10763/products/events/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Sun Oct 30 16:28:44 2011] ../../acisf10763/products/images/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.img and ../../acisf10763/products/images/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 30 16:28:44 2011] ../../acisf10763/products/spectra/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.pi and ../../acisf10763/products/spectra/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 30 16:28:47 2011] ../../acisf10763/products/lightcurves/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.lc and ../../acisf10763/products/lightcurves/fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 30 16:29:18 2011] Keeping rmf generated by specextract
[Sun Oct 30 16:29:18 2011] 155.426
[Sun Oct 30 16:30:12 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:30:12 2011] Error reading totcts from fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 30 16:30:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:30:12 2011] Using photon index=1.80, rate=0.00561, arf fullrun_ccd2_acisf10763_pi14-548_pass1_cl_src3.arf
[Sun Oct 30 16:30:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:30:12 2011] Updating source flux to 8.1e-14