[Thu Oct  6 15:52:33 2011] Detection parameters:
  Position = (399.5, 317.5) = 16 28 38.56 39 33 44.3
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 21.4 +/- 8.5
  Background counts = 50.6
  Rate = 0.0005 +/- 0.0002

[Thu Oct  6 15:52:34 2011] Off-axis axis estimate = 1.68'
[Thu Oct  6 15:54:57 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 15:54:57 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Oct  6 15:54:57 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.293
[Thu Oct  6 15:54:57 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.40"
[Thu Oct  6 15:54:57 2011] fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17.ximg exists
[Thu Oct  6 15:54:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17.csv
[Thu Oct  6 15:54:57 2011] fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17_1.ximg exists
[Thu Oct  6 15:54:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17.csv
[Thu Oct  6 15:54:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10748_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:54:58 2011] fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Thu Oct  6 15:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17.csv
[Thu Oct  6 15:54:58 2011] fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Oct  6 15:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17.csv
[Thu Oct  6 15:54:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10748_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:55:07 2011] Spatial fit model total counts = 232.125000, observed total counts = 518.000000
[Thu Oct  6 15:55:07 2011] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Oct  6 15:55:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:55:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:55:07 2011] Assessing source extent using major
[Thu Oct  6 15:55:07 2011] Source does appear to be extended
[Thu Oct  6 15:55:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 15:55:07 2011] Deleting source due to low Poisson probability 0.9