[Thu Oct  6 15:52:31 2011] Detection parameters:
  Position = (522.6, 188.9) = 16 29 15.38 39 30 34.9
  Extent = 1.8" x 1.0", rotation angle = 43 degrees
  Source counts = 38.1 +/- 7.2
  Background counts = 13.9
  Rate = 0.0009 +/- 0.0002

[Thu Oct  6 15:52:32 2011] Off-axis axis estimate = 6.11'
[Thu Oct  6 15:54:56 2011] Using EEF radius (= 1.69 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 15:54:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 15:54:56 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Thu Oct  6 15:54:56 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.036
[Thu Oct  6 15:54:56 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.69"
[Thu Oct  6 15:54:56 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5.ximg exists
[Thu Oct  6 15:54:56 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5.csv
[Thu Oct  6 15:54:56 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Oct  6 15:54:56 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5.csv
[Thu Oct  6 15:54:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:54:57 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Oct  6 15:54:57 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Oct  6 15:54:57 2011] Fit fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Oct  6 15:55:04 2011] Spatial fit model total counts = 51.310400, observed total counts = 54.000000
[Thu Oct  6 15:55:04 2011] Offset between fit and detection position for source 3 = 2.065704 pixels
[Thu Oct  6 15:55:04 2011] 54.599865 total counts/ 0.282365 bgd. counts: snr = 102.219639
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.065704 pixels
  Position = (521.0, 187.5) = 16 29 15.47 39 30 34.0
  Extent = 2.0 (1.8-2.0)", rotation angle = 0
  Source counts = 54.3 +/- 7.4
  Background counts = 0.3
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 15:55:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:55:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:55:04 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 15:55:04 2011] Source does appear to be extended
[Thu Oct  6 15:55:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 15:55:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 15:55:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 15:55:23 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Thu Oct  6 15:55:23 2011] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.903
[Thu Oct  6 15:55:23 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.95"
[Thu Oct  6 15:55:23 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct  6 15:55:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5.csv
[Thu Oct  6 15:55:23 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct  6 15:55:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5.csv
[Thu Oct  6 15:55:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:55:24 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct  6 15:55:24 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct  6 15:55:24 2011] Fit fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Oct  6 15:55:30 2011] Spatial fit model total counts = 62.998500, observed total counts = 63.000000
[Thu Oct  6 15:55:30 2011] Offset between fit and detection position for source 3 = 2.241866 pixels
[Thu Oct  6 15:55:30 2011] 63.306800 total counts/ 23.160000 bgd. counts: snr = 8.342220
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.241866 pixels
  Position = (522.6, 189.1) = 16 29 15.40 39 30 34.7
  Extent = 1.8 (1.2-2.4)", rotation angle = 0
  Source counts = 40.1 +/- 8.0
  Background counts = 23.2
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 15:55:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:55:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:55:30 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 15:55:30 2011] Source does appear to be extended
[Thu Oct  6 15:55:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 15:56:28 2011] Not overwriting source region fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.reg
[Thu Oct  6 15:56:28 2011] Extracting stamp from image fullrun_ccd2_acisf10748_pi14-548_cl_sm2.00.img.gz, (440, 106) - (606, 272)
[Thu Oct  6 15:56:28 2011] Writing fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3.gif
[Thu Oct  6 15:56:40 2011] ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.evt and ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct  6 15:56:40 2011] Size of ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.evt.gz[events] = 66 counts
[Thu Oct  6 15:56:40 2011] Mean chipx,y = (107.88, 305.52)
[Thu Oct  6 15:56:40 2011] Mean tdetx,y = (3366.52, 3978.12)
[Thu Oct  6 15:56:40 2011] chipx,y range = (87.00-131.00, 284.00-328.00)
[Thu Oct  6 15:56:40 2011] Size of ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 306 counts
[Thu Oct  6 15:56:40 2011] ../../acisf10748/products/images/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.img and ../../acisf10748/products/images/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct  6 15:56:40 2011] ../../acisf10748/products/spectra/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.pi and ../../acisf10748/products/spectra/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct  6 15:56:40 2011] Not generating rmf since there are only 40 counts
[Thu Oct  6 15:56:42 2011] ../../acisf10748/products/lightcurves/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.lc and ../../acisf10748/products/lightcurves/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct  6 15:56:52 2011] 179.598
[Thu Oct  6 15:57:31 2011] Updating aperture counts using extracted products
[Thu Oct  6 15:57:31 2011] Error reading totcts from fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct  6 15:57:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 15:57:31 2011] Using photon index=1.80, rate=0.00099, arf fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src3.arf
[Thu Oct  6 15:57:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 15:57:31 2011] Updating source flux to 1.3e-14
[Thu Oct  6 15:57:35 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting