[Thu Oct  6 15:52:31 2011] Detection parameters:
  Position = (859.4, 893.9) = 16 29 1.08 39 36 21.9
  Extent = 0.9" x 0.5", rotation angle = 27 degrees
  Source counts = 57.2 +/- 8.2
  Background counts = 9.8
  Rate = 0.001 +/- 0.0002

[Thu Oct  6 15:52:32 2011] Off-axis axis estimate = 4.59'
[Thu Oct  6 15:54:56 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 15:54:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 15:54:56 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Thu Oct  6 15:54:56 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.127
[Thu Oct  6 15:54:56 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.02"
[Thu Oct  6 15:54:56 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3.ximg exists
[Thu Oct  6 15:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3.csv
[Thu Oct  6 15:54:56 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Oct  6 15:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3.csv
[Thu Oct  6 15:54:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10748_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:54:57 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Oct  6 15:54:57 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Oct  6 15:54:57 2011] Fit fullrun_ccd2_acisf10748_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Oct  6 15:55:04 2011] Spatial fit model total counts = 80.153100, observed total counts = 80.000000
[Thu Oct  6 15:55:04 2011] Offset between fit and detection position for source 2 = 1.054391 pixels
[Thu Oct  6 15:55:04 2011] 79.514000 total counts/ 23.576000 bgd. counts: snr = 11.520514
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.054391 pixels
  Position = (860.2, 894.7) = 16 29 1.07 39 36 22.0
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 55.9 +/- 8.9
  Background counts = 23.6
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 15:55:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:55:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:55:04 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 15:55:04 2011] Source does appear to be extended
[Thu Oct  6 15:55:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 15:55:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 15:55:23 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Thu Oct  6 15:55:23 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Thu Oct  6 15:55:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.77"
[Thu Oct  6 15:55:23 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3.ximg exists
[Thu Oct  6 15:55:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3.csv
[Thu Oct  6 15:55:23 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Oct  6 15:55:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3.csv
[Thu Oct  6 15:55:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10748_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 15:55:24 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct  6 15:55:24 2011] fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct  6 15:55:24 2011] Fit fullrun_ccd2_acisf10748_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct  6 15:55:30 2011] Spatial fit model total counts = 77.029700, observed total counts = 78.000000
[Thu Oct  6 15:55:30 2011] Offset between fit and detection position for source 2 = 0.010367 pixels
[Thu Oct  6 15:55:30 2011] 76.410000 total counts/ 21.235300 bgd. counts: snr = 11.973215
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010367 pixels
  Position = (860.2, 894.7) = 16 29 1.07 39 36 22.0
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 55.2 +/- 8.7
  Background counts = 21.2
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 15:55:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:55:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:55:30 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 15:55:30 2011] Source does appear to be extended
[Thu Oct  6 15:55:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 15:56:28 2011] Not overwriting source region fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.reg
[Thu Oct  6 15:56:28 2011] Extracting stamp from image fullrun_ccd2_acisf10748_pi14-548_cl_sm2.00.img.gz, (824, 859) - (896, 931)
[Thu Oct  6 15:56:28 2011] Writing fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2.gif
[Thu Oct  6 15:56:34 2011] ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.evt and ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct  6 15:56:34 2011] Size of ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.evt.gz[events] = 67 counts
[Thu Oct  6 15:56:34 2011] Mean chipx,y = (708.94, 811.45)
[Thu Oct  6 15:56:34 2011] Mean tdetx,y = (3872.45, 3377.06)
[Thu Oct  6 15:56:34 2011] chipx,y range = (688.00-726.00, 792.00-830.00)
[Thu Oct  6 15:56:34 2011] Size of ../../acisf10748/products/events/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 129 counts
[Thu Oct  6 15:56:34 2011] ../../acisf10748/products/images/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.img and ../../acisf10748/products/images/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct  6 15:56:34 2011] ../../acisf10748/products/spectra/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.pi and ../../acisf10748/products/spectra/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct  6 15:56:34 2011] Not generating rmf since there are only 55 counts
[Thu Oct  6 15:56:37 2011] ../../acisf10748/products/lightcurves/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.lc and ../../acisf10748/products/lightcurves/fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct  6 15:56:52 2011] 177.729
[Thu Oct  6 15:57:31 2011] Updating aperture counts using extracted products
[Thu Oct  6 15:57:31 2011] Error reading totcts from fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct  6 15:57:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 15:57:31 2011] Using photon index=1.80, rate=0.00136, arf fullrun_ccd2_acisf10748_pi14-548_pass1_cl_src2.arf
[Thu Oct  6 15:57:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 15:57:31 2011] Updating source flux to 1.8e-14
[Thu Oct  6 15:57:35 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting