[Thu Sep 29 09:48:53 2011] Detection parameters:
  Position = (620.7, 416.6) = 2 28 13.56 0 34 55.8
  Extent = 0.7" x 0.5", rotation angle = 177 degrees
  Source counts = 29.3 +/- 5.5
  Background counts = 0.7
  Rate = 0.002 +/- 0.0004

[Thu Sep 29 09:48:54 2011] Off-axis axis estimate = 5.27'
[Thu Sep 29 09:49:34 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:49:34 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Thu Sep 29 09:49:34 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.921
[Thu Sep 29 09:49:34 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.29"
[Thu Sep 29 09:49:34 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4.ximg exists
[Thu Sep 29 09:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4.csv
[Thu Sep 29 09:49:34 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Sep 29 09:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4.csv
[Thu Sep 29 09:49:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10744_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:49:34 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Sep 29 09:49:34 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Sep 29 09:49:34 2011] Fit fullrun_ccd3_acisf10744_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Sep 29 09:49:41 2011] Spatial fit model total counts = 35.999800, observed total counts = 36.000000
[Thu Sep 29 09:49:41 2011] Offset between fit and detection position for source 4 = 0.708068 pixels
[Thu Sep 29 09:49:41 2011] 35.711290 total counts/ 8.543490 bgd. counts: snr = 9.294731
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.708068 pixels
  Position = (621.3, 417.1) = 2 28 13.56 0 34 55.8
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 27.2 +/- 6.0
  Background counts = 8.5
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 09:49:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:49:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:49:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:49:41 2011] Source does appear to be extended
[Thu Sep 29 09:49:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:49:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:49:58 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Thu Sep 29 09:49:58 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Thu Sep 29 09:49:58 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.81"
[Thu Sep 29 09:49:58 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4.ximg exists
[Thu Sep 29 09:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4.csv
[Thu Sep 29 09:49:58 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Sep 29 09:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4.csv
[Thu Sep 29 09:49:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10744_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:49:58 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep 29 09:49:58 2011] fullrun_ccd3_acisf10744_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep 29 09:49:58 2011] Fit fullrun_ccd3_acisf10744_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Sep 29 09:50:06 2011] Spatial fit model total counts = 33.999900, observed total counts = 34.000000
[Thu Sep 29 09:50:06 2011] Offset between fit and detection position for source 4 = 0.063507 pixels
[Thu Sep 29 09:50:06 2011] 34.256860 total counts/ 6.926660 bgd. counts: snr = 10.384387
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.063507 pixels
  Position = (621.2, 417.0) = 2 28 13.56 0 34 55.8
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 27.3 +/- 5.9
  Background counts = 6.9
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 09:50:06 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:50:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:50:06 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:50:06 2011] Source does appear to be extended
[Thu Sep 29 09:50:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:53:17 2011] Not overwriting source region fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.reg
[Thu Sep 29 09:53:17 2011] Extracting stamp from image fullrun_ccd3_acisf10744_pi14-548_cl_sm2.00.img.gz, (585, 381) - (658, 453)
[Thu Sep 29 09:53:17 2011] Writing fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4.gif
[Thu Sep 29 09:53:43 2011] ../../acisf10744/products/events/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.evt and ../../acisf10744/products/events/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Thu Sep 29 09:53:44 2011] Size of ../../acisf10744/products/events/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.evt.gz[events] = 31 counts
[Thu Sep 29 09:53:44 2011] Mean chipx,y = (662.97, 447.94)
[Thu Sep 29 09:53:44 2011] Mean tdetx,y = (4684.06, 3723.97)
[Thu Sep 29 09:53:44 2011] chipx,y range = (648.00-681.00, 428.00-465.00)
[Thu Sep 29 09:53:44 2011] Size of ../../acisf10744/products/events/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 6 counts
[Thu Sep 29 09:53:44 2011] ../../acisf10744/products/images/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.img and ../../acisf10744/products/images/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Thu Sep 29 09:53:44 2011] ../../acisf10744/products/spectra/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.pi and ../../acisf10744/products/spectra/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Thu Sep 29 09:53:44 2011] Not generating rmf since there are only 27 counts
[Thu Sep 29 09:53:50 2011] ../../acisf10744/products/lightcurves/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.lc and ../../acisf10744/products/lightcurves/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Thu Sep 29 09:54:45 2011] 185.711
[Thu Sep 29 09:55:00 2011] Updating aperture counts using extracted products
[Thu Sep 29 09:55:00 2011] Error reading totcts from fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Sep 29 09:55:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 09:55:00 2011] Using photon index=1.80, rate=0.00185, arf fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4.arf
[Thu Sep 29 09:55:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 09:55:00 2011] Updating source flux to 2.3e-14
[Thu Sep 29 09:55:08 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 09:55:09 2011] acisf10744/analysis//spectral/fullrun_ccd3_acisf10744_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete