[Sun Oct 30 05:31:12 2011] Detection parameters:
  Position = (386.8, 303.4) = 9 9 45.65 -9 41 29.8
  Extent = 0.6" x 0.5", rotation angle = 55 degrees
  Source counts = 17.3 +/- 4.6
  Background counts = 3.7
  Rate = 0.0002 +/- 5e-05

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 2.19'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct 30 05:33:04 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.45"
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25.csv
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25_1.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25.csv
[Sun Oct 30 05:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:07 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sun Oct 30 05:33:07 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Oct 30 05:33:07 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 26.996600, observed total counts = 27.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 7 = 0.752650 pixels
[Sun Oct 30 05:33:25 2011] 27.298100 total counts/ 11.390600 bgd. counts: snr = 4.713339
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.752650 pixels
  Position = (386.9, 304.1) = 9 9 45.67 -9 41 29.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.9 +/- 5.2
  Background counts = 11.4
  Rate = 0.0002 +/- 6e-05
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 30 05:33:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.592
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.39"
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25.csv
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25_1.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25.csv
[Sun Oct 30 05:33:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 28.997700, observed total counts = 29.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 7 = 0.006504 pixels
[Sun Oct 30 05:34:10 2011] 29.405100 total counts/ 13.724600 bgd. counts: snr = 4.232628
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.006504 pixels
  Position = (386.9, 304.1) = 9 9 45.67 -9 41 29.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.7 +/- 5.4
  Background counts = 13.7
  Rate = 0.0002 +/- 6e-05
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (369, 286) - (404, 322)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7.gif
[Sun Oct 30 05:39:27 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Oct 30 05:39:27 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.evt.gz[events] = 19 counts
[Sun Oct 30 05:39:27 2011] Mean chipx,y = (686.00, 1006.95)
[Sun Oct 30 05:39:27 2011] Mean tdetx,y = (4125.05, 3747.00)
[Sun Oct 30 05:39:27 2011] chipx,y range = (672.00-705.00, 990.00-1022.00)
[Sun Oct 30 05:39:27 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 17 counts
[Sun Oct 30 05:39:27 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Oct 30 05:39:27 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Oct 30 05:39:27 2011] Not generating rmf since there are only 15 counts
[Sun Oct 30 05:39:30 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 163.014
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000167, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src7.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 2.3e-15
[Sun Oct 30 05:40:50 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting