[Sun Oct 30 05:31:12 2011] Detection parameters:
  Position = (796.3, 200.9) = 9 9 32.02 -9 42 20.2
  Extent = 0.8" x 0.6", rotation angle = 96 degrees
  Source counts = 82.3 +/- 10.2
  Background counts = 22.7
  Rate = 0.0009 +/- 0.0001

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 2.54'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Oct 30 05:33:04 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.982
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.50"
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 05:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 133.385000, observed total counts = 131.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 5 = 0.717366 pixels
[Sun Oct 30 05:33:25 2011] 134.976700 total counts/ 57.731700 bgd. counts: snr = 10.166307
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.717366 pixels
  Position = (796.9, 201.4) = 9 9 32.02 -9 42 20.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 77.2 +/- 11.6
  Background counts = 57.7
  Rate = 0.0008 +/- 0.0001
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 30 05:33:51 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.999
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.49"
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6.csv
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6.csv
[Sun Oct 30 05:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 132.999000, observed total counts = 133.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 5 = 0.012063 pixels
[Sun Oct 30 05:34:10 2011] 134.531500 total counts/ 59.309800 bgd. counts: snr = 9.767421
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.012063 pixels
  Position = (796.9, 201.4) = 9 9 32.02 -9 42 20.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 75.2 +/- 11.6
  Background counts = 59.3
  Rate = 0.0008 +/- 0.0001
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (774, 179) - (820, 224)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5.gif
[Sun Oct 30 05:38:37 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Oct 30 05:38:37 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.evt.gz[events] = 90 counts
[Sun Oct 30 05:38:37 2011] Mean chipx,y = (991.39, 713.46)
[Sun Oct 30 05:38:37 2011] Mean tdetx,y = (4418.54, 4052.39)
[Sun Oct 30 05:38:37 2011] chipx,y range = (972.00-1010.00, 694.00-734.00)
[Sun Oct 30 05:38:37 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 126 counts
[Sun Oct 30 05:38:37 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Oct 30 05:38:37 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Oct 30 05:38:37 2011] Not generating rmf since there are only 75 counts
[Sun Oct 30 05:38:40 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 201.359
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000799, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src5.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 9.1e-15
[Sun Oct 30 05:40:50 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting