[Sun Oct 30 05:31:13 2011] Detection parameters: Position = (799.8, 440.5) = 9 9 31.91 -9 40 22.3 Extent = 0.5" x 0.5", rotation angle = 84 degrees Source counts = 15.9 +/- 5.2 Background counts = 11.1 Rate = 0.0002 +/- 6e-05 [Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 3.83' [Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting [Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.78" [Sun Oct 30 05:33:04 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.146 [Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.78" [Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27.ximg exists [Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27.csv [Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27_1.ximg exists [Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27.csv [Sun Oct 30 05:33:06 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 30 05:33:07 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src27.ximg exists [Sun Oct 30 05:33:07 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists [Sun Oct 30 05:33:07 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly [Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 89.999000, observed total counts = 90.000000 [Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 27 = 1.115636 pixels [Sun Oct 30 05:33:25 2011] 92.038100 total counts/ 81.145700 bgd. counts: snr = 1.209180 Spatial fit parameters: Offset between fit and detection position for source 27 = 1.115636 pixels Position = (800.5, 441.5) = 9 9 31.90 -9 40 22.1 Extent = 0.4 (0.2-0.7)", rotation angle = 0 Source counts = 10.9 +/- 9.6 Background counts = 81.1 Rate = 0.0001 +/- 0.0001 Deleting source due to low Poisson probability