[Sun Oct 30 05:31:13 2011] Detection parameters:
  Position = (591.7, 733.1) = 9 9 38.83 -9 37 58.4
  Extent = 1.0" x 0.7", rotation angle = 170 degrees
  Source counts = 68.8 +/- 9.2
  Background counts = 15.2
  Rate = 0.0007 +/- 0.0001

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 5.48'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 1.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 1.38"
[Sun Oct 30 05:33:04 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.957
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.38"
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9.csv
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9.csv
[Sun Oct 30 05:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 102.521000, observed total counts = 103.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 20 = 0.836135 pixels
[Sun Oct 30 05:33:25 2011] 99.647200 total counts/ 27.807100 bgd. counts: snr = 13.623512
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.836135 pixels
  Position = (592.3, 733.6) = 9 9 38.83 -9 37 58.3
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 71.8 +/- 10.0
  Background counts = 27.8
  Rate = 0.0008 +/- 0.0001
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Sun Oct 30 05:33:51 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.99"
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9.csv
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9.csv
[Sun Oct 30 05:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 98.469500, observed total counts = 100.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 20 = 0.114487 pixels
[Sun Oct 30 05:34:10 2011] 94.886600 total counts/ 24.522600 bgd. counts: snr = 14.209123
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.114487 pixels
  Position = (592.4, 733.7) = 9 9 38.83 -9 37 58.3
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 70.4 +/- 9.7
  Background counts = 24.5
  Rate = 0.0007 +/- 0.0001
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (548, 689) - (637, 779)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20.gif
[Sun Oct 30 05:38:46 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Oct 30 05:38:46 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.evt.gz[events] = 90 counts
[Sun Oct 30 05:38:46 2011] Mean chipx,y = (429.23, 606.83)
[Sun Oct 30 05:38:46 2011] Mean tdetx,y = (4525.17, 3490.23)
[Sun Oct 30 05:38:46 2011] chipx,y range = (409.00-453.00, 586.00-626.00)
[Sun Oct 30 05:38:46 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 279 counts
[Sun Oct 30 05:38:46 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Oct 30 05:38:46 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Oct 30 05:38:46 2011] Not generating rmf since there are only 70 counts
[Sun Oct 30 05:38:49 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 181.416
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000748, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src20.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 9.5e-15
[Sun Oct 30 05:40:50 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting