[Sun Oct 30 05:31:13 2011] Detection parameters:
  Position = (144.6, 701.8) = 9 9 53.71 -9 38 13.7
  Extent = 1.9" x 0.9", rotation angle = 19 degrees
  Source counts = 80.2 +/- 10.0
  Background counts = 19.8
  Rate = 0.0009 +/- 0.0001

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 6.02'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Sun Oct 30 05:33:04 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.954
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.64"
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7.csv
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7.csv
[Sun Oct 30 05:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 95.997200, observed total counts = 96.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 19 = 0.209599 pixels
[Sun Oct 30 05:33:25 2011] 96.526300 total counts/ 19.076600 bgd. counts: snr = 17.732471
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.209599 pixels
  Position = (144.8, 701.9) = 9 9 53.72 -9 38 14.0
  Extent = 1.5 (1.1-1.9)", rotation angle = 0
  Source counts = 77.4 +/- 9.8
  Background counts = 19.1
  Rate = 0.0008 +/- 0.0001
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 1.46"
[Sun Oct 30 05:33:51 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.46"
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7.csv
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7.csv
[Sun Oct 30 05:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 91.483600, observed total counts = 91.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 19 = 0.094634 pixels
[Sun Oct 30 05:34:10 2011] 91.606900 total counts/ 10.821500 bgd. counts: snr = 24.557782
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.094634 pixels
  Position = (144.8, 702.0) = 9 9 53.72 -9 38 13.9
  Extent = 1.5 (1.0-1.9)", rotation angle = 0
  Source counts = 80.8 +/- 9.6
  Background counts = 10.8
  Rate = 0.0009 +/- 0.0001
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (76, 634) - (213, 770)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19.gif
[Sun Oct 30 05:38:40 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sun Oct 30 05:38:40 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.evt.gz[events] = 103 counts
[Sun Oct 30 05:38:40 2011] Mean chipx,y = (220.62, 1002.14)
[Sun Oct 30 05:38:40 2011] Mean tdetx,y = (4129.86, 3281.62)
[Sun Oct 30 05:38:40 2011] chipx,y range = (200.00-249.00, 977.00-1022.00)
[Sun Oct 30 05:38:40 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 186 counts
[Sun Oct 30 05:38:40 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Sun Oct 30 05:38:40 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sun Oct 30 05:38:40 2011] Not generating rmf since there are only 80 counts
[Sun Oct 30 05:38:43 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 166.843
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000858, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src19.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 1.2e-14
[Sun Oct 30 05:40:50 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting