[Sun Oct 30 05:31:12 2011] Detection parameters:
  Position = (751.3, 424.5) = 9 9 33.52 -9 40 30.2
  Extent = 0.5" x 0.5", rotation angle = 1 degrees
  Source counts = 22.4 +/- 6.2
  Background counts = 15.6
  Rate = 0.0002 +/- 7e-05

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 3.50'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 30 05:33:04 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.826
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.69"
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20.csv
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20.csv
[Sun Oct 30 05:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 71.812100, observed total counts = 71.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 13 = 0.721574 pixels
[Sun Oct 30 05:33:25 2011] 72.078200 total counts/ 48.929600 bgd. counts: snr = 3.309321
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.721574 pixels
  Position = (751.9, 424.9) = 9 9 33.52 -9 40 30.3
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 23.1 +/- 8.5
  Background counts = 48.9
  Rate = 0.0002 +/- 9e-05
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 30 05:33:51 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.097
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.69"
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20.csv
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20.csv
[Sun Oct 30 05:33:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 73.594000, observed total counts = 71.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 13 = 0.039997 pixels
[Sun Oct 30 05:34:10 2011] 73.028400 total counts/ 48.491200 bgd. counts: snr = 3.523656
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.039997 pixels
  Position = (751.9, 424.9) = 9 9 33.52 -9 40 30.2
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 24.5 +/- 8.5
  Background counts = 48.5
  Rate = 0.0003 +/- 9e-05
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (720, 393) - (784, 457)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13.gif
[Sun Oct 30 05:39:14 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Oct 30 05:39:14 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.evt.gz[events] = 40 counts
[Sun Oct 30 05:39:14 2011] Mean chipx,y = (775.65, 634.95)
[Sun Oct 30 05:39:14 2011] Mean tdetx,y = (4497.05, 3836.65)
[Sun Oct 30 05:39:14 2011] chipx,y range = (761.00-794.00, 615.00-654.00)
[Sun Oct 30 05:39:14 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 289 counts
[Sun Oct 30 05:39:14 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Oct 30 05:39:14 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Oct 30 05:39:14 2011] Not generating rmf since there are only 24 counts
[Sun Oct 30 05:39:16 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 186.474
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000261, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src13.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 3.2e-15
[Sun Oct 30 05:40:50 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting