[Sun Oct 30 05:31:12 2011] Detection parameters:
  Position = (789.2, 409.8) = 9 9 32.26 -9 40 37.4
  Extent = 0.5" x 0.5", rotation angle = 139 degrees
  Source counts = 53.1 +/- 8.4
  Background counts = 17.9
  Rate = 0.0006 +/- 9e-05

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 3.58'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct 30 05:33:04 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.052
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.71"
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:33:05 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 30 05:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 106.007000, observed total counts = 106.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 11 = 0.766140 pixels
[Sun Oct 30 05:33:25 2011] 105.069500 total counts/ 56.664300 bgd. counts: snr = 6.430389
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.766140 pixels
  Position = (789.5, 410.5) = 9 9 32.27 -9 40 37.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 48.4 +/- 10.3
  Background counts = 56.7
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 30 05:33:51 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.000
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.49"
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:33:52 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 05:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 106.000000, observed total counts = 106.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 11 = 0.039939 pixels
[Sun Oct 30 05:34:10 2011] 105.071800 total counts/ 56.194100 bgd. counts: snr = 6.520267
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.039939 pixels
  Position = (789.5, 410.5) = 9 9 32.27 -9 40 37.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 48.9 +/- 10.3
  Background counts = 56.2
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (766, 387) - (813, 434)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11.gif
[Sun Oct 30 05:38:52 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 30 05:38:52 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.evt.gz[events] = 63 counts
[Sun Oct 30 05:38:52 2011] Mean chipx,y = (809.97, 611.29)
[Sun Oct 30 05:38:52 2011] Mean tdetx,y = (4520.71, 3870.97)
[Sun Oct 30 05:38:52 2011] chipx,y range = (789.00-828.00, 594.00-629.00)
[Sun Oct 30 05:38:52 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 158 counts
[Sun Oct 30 05:38:52 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 30 05:38:52 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Oct 30 05:38:52 2011] Not generating rmf since there are only 48 counts
[Sun Oct 30 05:38:55 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 194.892
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000519, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src11.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 6.1e-15
[Sun Oct 30 05:40:50 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting