[Sun Oct 30 05:31:12 2011] Detection parameters:
  Position = (459.0, 362.7) = 9 9 43.25 -9 41 0.6
  Extent = 0.8" x 0.5", rotation angle = 82 degrees
  Source counts = 20.5 +/- 5.1
  Background counts = 5.5
  Rate = 0.0002 +/- 5e-05

[Sun Oct 30 05:31:14 2011] Off-axis axis estimate = 2.45'
[Sun Oct 30 05:33:04 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:04 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 30 05:33:04 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.018
[Sun Oct 30 05:33:04 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.49"
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct 30 05:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 05:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct 30 05:33:06 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct 30 05:33:06 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Oct 30 05:33:25 2011] Spatial fit model total counts = 44.479100, observed total counts = 45.000000
[Sun Oct 30 05:33:25 2011] Offset between fit and detection position for source 10 = 1.097334 pixels
[Sun Oct 30 05:33:25 2011] 43.211300 total counts/ 25.743200 bgd. counts: snr = 3.442821
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.097334 pixels
  Position = (459.4, 363.7) = 9 9 43.25 -9 41 0.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.5 +/- 6.6
  Background counts = 25.7
  Rate = 0.0002 +/- 7e-05
[Sun Oct 30 05:33:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:25 2011] Source does appear to be extended
[Sun Oct 30 05:33:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:51 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 30 05:33:51 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Sun Oct 30 05:33:51 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.49"
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21.csv
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Oct 30 05:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21.csv
[Sun Oct 30 05:33:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10743_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Oct 30 05:33:53 2011] fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Oct 30 05:33:53 2011] Fit fullrun_ccd3_acisf10743_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Oct 30 05:34:10 2011] Spatial fit model total counts = 44.998300, observed total counts = 45.000000
[Sun Oct 30 05:34:10 2011] Offset between fit and detection position for source 10 = 0.021920 pixels
[Sun Oct 30 05:34:10 2011] 45.395200 total counts/ 28.137700 bgd. counts: snr = 3.253371
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.021920 pixels
  Position = (459.5, 363.7) = 9 9 43.25 -9 41 0.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.3 +/- 6.7
  Background counts = 28.1
  Rate = 0.0002 +/- 7e-05
[Sun Oct 30 05:34:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:10 2011] Source does appear to be extended
[Sun Oct 30 05:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:38:22 2011] Not overwriting source region fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 30 05:38:22 2011] Extracting stamp from image fullrun_ccd3_acisf10743_pi14-548_cl_sm2.00.img.gz, (438, 342) - (481, 386)
[Sun Oct 30 05:38:22 2011] Writing fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10.gif
[Sun Oct 30 05:39:16 2011] ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.evt and ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 30 05:39:17 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.evt.gz[events] = 22 counts
[Sun Oct 30 05:39:17 2011] Mean chipx,y = (676.91, 914.77)
[Sun Oct 30 05:39:17 2011] Mean tdetx,y = (4217.23, 3737.91)
[Sun Oct 30 05:39:17 2011] chipx,y range = (657.00-696.00, 896.00-932.00)
[Sun Oct 30 05:39:17 2011] Size of ../../acisf10743/products/events/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 58 counts
[Sun Oct 30 05:39:17 2011] ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.img and ../../acisf10743/products/images/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 30 05:39:17 2011] ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.pi and ../../acisf10743/products/spectra/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Oct 30 05:39:17 2011] Not generating rmf since there are only 17 counts
[Sun Oct 30 05:39:19 2011] ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 30 05:39:41 2011] 194.598
[Sun Oct 30 05:39:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:59 2011] Error reading totcts from fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 30 05:39:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:59 2011] Using photon index=1.80, rate=0.000183, arf fullrun_ccd3_acisf10743_pi14-548_pass1_cl_src10.arf
[Sun Oct 30 05:39:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:59 2011] Updating source flux to 2.1e-15
[Sun Oct 30 05:40:50 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting