[Sun Oct 30 05:31:06 2011] Detection parameters:
  Position = (368.4, 694.7) = 9 9 27.53 -9 45 29.2
  Extent = 0.8" x 0.6", rotation angle = 128 degrees
  Source counts = 268.1 +/- 17.0
  Background counts = 21.9
  Rate = 0.003 +/- 0.0002

[Sun Oct 30 05:31:08 2011] Off-axis axis estimate = 3.99'
[Sun Oct 30 05:33:01 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:01 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sun Oct 30 05:33:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Sun Oct 30 05:33:01 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.83"
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 05:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Oct 30 05:33:02 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Oct 30 05:33:19 2011] Source 8 is offset by -6.295040 and -7.005733 pixels which is larger than
2 X fitted extent = 0.839065 x 0.839065, not incorporating fit results
[Sun Oct 30 05:33:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:19 2011] Assessing source extent using major
[Sun Oct 30 05:33:19 2011] Source does appear to be extended
[Sun Oct 30 05:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Oct 30 05:33:48 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:48 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sun Oct 30 05:33:48 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Sun Oct 30 05:33:48 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.83"
[Sun Oct 30 05:33:48 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5.ximg exists
[Sun Oct 30 05:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5.csv
[Sun Oct 30 05:33:48 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Oct 30 05:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5.csv
[Sun Oct 30 05:33:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Oct 30 05:33:49 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Oct 30 05:34:03 2011] Spatial fit model total counts = 302.660000, observed total counts = 302.000000
[Sun Oct 30 05:34:03 2011] Offset between fit and detection position for source 8 = 0.522930 pixels
[Sun Oct 30 05:34:03 2011] 303.869300 total counts/ 53.769300 bgd. counts: snr = 34.107234
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.522930 pixels
  Position = (368.6, 695.2) = 9 9 27.53 -9 45 29.2
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 250.1 +/- 17.4
  Background counts = 53.8
  Rate = 0.003 +/- 0.0002
[Sun Oct 30 05:34:03 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:03 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:03 2011] Source does appear to be extended
[Sun Oct 30 05:34:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:35:34 2011] Not overwriting source region fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.reg
[Sun Oct 30 05:35:34 2011] Extracting stamp from image fullrun_ccd1_acisf10743_pi14-548_cl_sm2.00.img.gz, (338, 665) - (399, 726)
[Sun Oct 30 05:35:34 2011] Writing fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8.gif
[Sun Oct 30 05:35:47 2011] ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.evt and ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Oct 30 05:35:47 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.evt.gz[events] = 270 counts
[Sun Oct 30 05:35:47 2011] Mean chipx,y = (344.86, 802.41)
[Sun Oct 30 05:35:47 2011] Mean tdetx,y = (4329.59, 4451.86)
[Sun Oct 30 05:35:47 2011] chipx,y range = (323.00-364.00, 783.00-822.00)
[Sun Oct 30 05:35:47 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 130 counts
[Sun Oct 30 05:35:47 2011] ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.img and ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Oct 30 05:35:47 2011] ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.pi and ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Oct 30 05:35:50 2011] ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Oct 30 05:36:48 2011] Keeping rmf generated by specextract
[Sun Oct 30 05:36:48 2011] 192.587
[Sun Oct 30 05:39:58 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:58 2011] Error reading totcts from fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8_src.pi.gz
[Sun Oct 30 05:39:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:58 2011] Using photon index=1.80, rate=0.00266, arf fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src8.arf
[Sun Oct 30 05:39:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:58 2011] Updating source flux to 3.1e-14
[Sun Oct 30 05:40:10 2011] Flag b found in src. 8 procflags, skipping spectral fitting