[Sun Oct 30 05:31:08 2011] Detection parameters:
  Position = (690.4, 343.5) = 9 9 16.81 -9 48 22.0
  Extent = 1.3" x 1.0", rotation angle = 118 degrees
  Source counts = 92.9 +/- 11.5
  Background counts = 39.1
  Rate = 0.001 +/- 0.0001

[Sun Oct 30 05:31:08 2011] Off-axis axis estimate = 7.81'
[Sun Oct 30 05:33:01 2011] Using EEF radius (= 2.70 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:33:01 2011] Initial guess for spatial extent in simple fitting = 2.70"
[Sun Oct 30 05:33:01 2011] source mask rpix=5.5, npix_max = 143, mask sum = 144, frac = 1.003
[Sun Oct 30 05:33:01 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.70"
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:33:02 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:33:19 2011] Spatial fit model total counts = 170.288000, observed total counts = 171.000000
[Sun Oct 30 05:33:19 2011] Offset between fit and detection position for source 32 = 0.938803 pixels
[Sun Oct 30 05:33:19 2011] 169.142300 total counts/ 98.394400 bgd. counts: snr = 7.132280
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.938803 pixels
  Position = (691.1, 344.0) = 9 9 16.80 -9 48 21.9
  Extent = 1.5 (1.1-2.0)", rotation angle = 0
  Source counts = 70.7 +/- 13.0
  Background counts = 98.4
  Rate = 0.0008 +/- 0.0001
[Sun Oct 30 05:33:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:19 2011] Source does appear to be extended
[Sun Oct 30 05:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:48 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Sun Oct 30 05:33:48 2011] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.088
[Sun Oct 30 05:33:48 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.52"
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 05:33:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 05:33:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:33:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:33:49 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:34:03 2011] Spatial fit model total counts = 99.684700, observed total counts = 100.000000
[Sun Oct 30 05:34:03 2011] Offset between fit and detection position for source 32 = 0.499277 pixels
[Sun Oct 30 05:34:03 2011] 100.077380 total counts/ 3.406680 bgd. counts: snr = 52.375622
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.499277 pixels
  Position = (691.2, 343.5) = 9 9 16.80 -9 48 22.2
  Extent = 1.9 (1.1-2.2)", rotation angle = 0
  Source counts = 96.7 +/- 10.0
  Background counts = 3.4
  Rate = 0.001 +/- 0.0001
[Sun Oct 30 05:34:03 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:03 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:03 2011] Source does appear to be extended
[Sun Oct 30 05:34:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:35:34 2011] Not overwriting source region fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.reg
[Sun Oct 30 05:35:34 2011] Extracting stamp from image fullrun_ccd1_acisf10743_pi14-548_cl_sm2.00.img.gz, (606, 258) - (777, 429)
[Sun Oct 30 05:35:34 2011] Writing fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32.gif
[Sun Oct 30 05:36:05 2011] ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.evt and ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Sun Oct 30 05:36:05 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.evt.gz[events] = 142 counts
[Sun Oct 30 05:36:05 2011] Mean chipx,y = (813.16, 711.94)
[Sun Oct 30 05:36:05 2011] Mean tdetx,y = (4420.06, 4920.16)
[Sun Oct 30 05:36:05 2011] chipx,y range = (787.00-843.00, 683.00-739.00)
[Sun Oct 30 05:36:05 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 507 counts
[Sun Oct 30 05:36:05 2011] ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.img and ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Sun Oct 30 05:36:05 2011] ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.pi and ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Sun Oct 30 05:36:05 2011] Not generating rmf since there are only 96 counts
[Sun Oct 30 05:36:08 2011] ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Sun Oct 30 05:36:48 2011] 175.481
[Sun Oct 30 05:39:58 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:58 2011] Error reading totcts from fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32_src.pi.gz
[Sun Oct 30 05:39:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:58 2011] Using photon index=1.80, rate=0.00103, arf fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src32.arf
[Sun Oct 30 05:39:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:58 2011] Updating source flux to 1.3e-14
[Sun Oct 30 05:40:10 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting