[Sun Oct 30 05:31:06 2011] Detection parameters:
  Position = (428.3, 749.0) = 9 9 25.53 -9 45 2.5
  Extent = 0.5" x 0.5", rotation angle = 92 degrees
  Source counts = 30.2 +/- 6.4
  Background counts = 10.8
  Rate = 0.0003 +/- 7e-05

[Sun Oct 30 05:31:08 2011] Off-axis axis estimate = 4.22'
[Sun Oct 30 05:33:01 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:01 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Sun Oct 30 05:33:01 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Sun Oct 30 05:33:01 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.90"
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23.csv
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23_1.ximg exists
[Sun Oct 30 05:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23.csv
[Sun Oct 30 05:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:03 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sun Oct 30 05:33:03 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Oct 30 05:33:03 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Oct 30 05:33:19 2011] Spatial fit model total counts = 63.272600, observed total counts = 60.000000
[Sun Oct 30 05:33:19 2011] Offset between fit and detection position for source 13 = 0.667201 pixels
[Sun Oct 30 05:33:19 2011] 63.124000 total counts/ 33.278300 bgd. counts: snr = 5.173700
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.667201 pixels
  Position = (428.7, 749.5) = 9 9 25.54 -9 45 2.5
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 29.8 +/- 7.9
  Background counts = 33.3
  Rate = 0.0003 +/- 8e-05
[Sun Oct 30 05:33:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:19 2011] Source does appear to be extended
[Sun Oct 30 05:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:48 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Oct 30 05:33:48 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.884
[Sun Oct 30 05:33:48 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.66"
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23.ximg exists
[Sun Oct 30 05:33:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23.csv
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23_1.ximg exists
[Sun Oct 30 05:33:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23.csv
[Sun Oct 30 05:33:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Oct 30 05:33:49 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Oct 30 05:34:03 2011] Spatial fit model total counts = 63.237100, observed total counts = 60.000000
[Sun Oct 30 05:34:03 2011] Offset between fit and detection position for source 13 = 0.007006 pixels
[Sun Oct 30 05:34:03 2011] 63.085100 total counts/ 33.437600 bgd. counts: snr = 5.127085
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.007006 pixels
  Position = (428.7, 749.5) = 9 9 25.54 -9 45 2.5
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 29.6 +/- 7.9
  Background counts = 33.4
  Rate = 0.0003 +/- 8e-05
[Sun Oct 30 05:34:03 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:03 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:03 2011] Source does appear to be extended
[Sun Oct 30 05:34:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:35:35 2011] Not overwriting source region fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.reg
[Sun Oct 30 05:35:35 2011] Extracting stamp from image fullrun_ccd1_acisf10743_pi14-548_cl_sm2.00.img.gz, (399, 720) - (458, 779)
[Sun Oct 30 05:35:35 2011] Writing fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13.gif
[Sun Oct 30 05:36:39 2011] ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.evt and ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Oct 30 05:36:39 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.evt.gz[events] = 41 counts
[Sun Oct 30 05:36:39 2011] Mean chipx,y = (331.17, 720.61)
[Sun Oct 30 05:36:39 2011] Mean tdetx,y = (4411.39, 4438.17)
[Sun Oct 30 05:36:39 2011] chipx,y range = (308.00-349.00, 704.00-740.00)
[Sun Oct 30 05:36:39 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 145 counts
[Sun Oct 30 05:36:39 2011] ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.img and ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Oct 30 05:36:39 2011] ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.pi and ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Oct 30 05:36:39 2011] Not generating rmf since there are only 29 counts
[Sun Oct 30 05:36:42 2011] ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Oct 30 05:36:49 2011] 191.327
[Sun Oct 30 05:39:58 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:58 2011] Error reading totcts from fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Oct 30 05:39:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:58 2011] Using photon index=1.80, rate=0.000315, arf fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src13.arf
[Sun Oct 30 05:39:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:58 2011] Updating source flux to 3.8e-15
[Sun Oct 30 05:40:10 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting