[Sun Oct 30 05:31:05 2011] Detection parameters:
  Position = (780.6, 988.9) = 9 9 13.81 -9 43 4.4
  Extent = 0.9" x 0.7", rotation angle = 138 degrees
  Source counts = 1368.9 +/- 41.2
  Background counts = 327.1
  Rate = 0.01 +/- 0.0004

[Sun Oct 30 05:31:08 2011] Off-axis axis estimate = 6.79'
[Sun Oct 30 05:33:01 2011] Using EEF radius (= 2.06 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:33:01 2011] Initial guess for spatial extent in simple fitting = 2.06"
[Sun Oct 30 05:33:01 2011] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.025
[Sun Oct 30 05:33:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.06"
[Sun Oct 30 05:33:01 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:33:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:33:01 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:33:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:33:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:33:02 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:33:02 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:33:19 2011] Spatial fit model total counts = 1889.680000, observed total counts = 1896.000000
[Sun Oct 30 05:33:19 2011] Offset between fit and detection position for source 1 = 0.872802 pixels
[Sun Oct 30 05:33:19 2011] 1893.208000 total counts/ 585.508000 bgd. counts: snr = 54.043281
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.872802 pixels
  Position = (781.2, 989.5) = 9 9 13.81 -9 43 4.4
  Extent = 1.6 (1.5-1.6)", rotation angle = 0
  Source counts = 1307.7 +/- 43.5
  Background counts = 585.5
  Rate = 0.01 +/- 0.0005
[Sun Oct 30 05:33:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:19 2011] Source does appear to be extended
[Sun Oct 30 05:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:33:48 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Sun Oct 30 05:33:48 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.903
[Sun Oct 30 05:33:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.57"
[Sun Oct 30 05:33:48 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 05:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:33:48 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 05:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:33:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10743_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 05:33:49 2011] fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:33:49 2011] Fit fullrun_ccd1_acisf10743_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:34:03 2011] Spatial fit model total counts = 1673.360000, observed total counts = 1685.000000
[Sun Oct 30 05:34:03 2011] Offset between fit and detection position for source 1 = 0.023323 pixels
[Sun Oct 30 05:34:03 2011] 1678.802000 total counts/ 406.002000 bgd. counts: snr = 63.167848
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023323 pixels
  Position = (781.2, 989.4) = 9 9 13.81 -9 43 4.4
  Extent = 1.5 (1.4-1.6)", rotation angle = 0
  Source counts = 1272.8 +/- 41.0
  Background counts = 406.0
  Rate = 0.01 +/- 0.0004
[Sun Oct 30 05:34:03 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:03 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:03 2011] Source does appear to be extended
[Sun Oct 30 05:34:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:35:34 2011] Not overwriting source region fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 05:35:34 2011] Extracting stamp from image fullrun_ccd1_acisf10743_pi14-548_cl_sm2.00.img.gz, (711, 920) - (851, 1059)
[Sun Oct 30 05:35:34 2011] Writing fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 05:35:36 2011] ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.evt and ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 05:35:36 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1611 counts
[Sun Oct 30 05:35:36 2011] Mean chipx,y = (310.12, 295.01)
[Sun Oct 30 05:35:36 2011] Mean tdetx,y = (4836.99, 4417.12)
[Sun Oct 30 05:35:36 2011] chipx,y range = (283.00-339.00, 269.00-321.00)
[Sun Oct 30 05:35:36 2011] Size of ../../acisf10743/products/events/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2281 counts
[Sun Oct 30 05:35:36 2011] ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.img and ../../acisf10743/products/images/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 05:35:36 2011] ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.pi and ../../acisf10743/products/spectra/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 05:35:39 2011] ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 05:36:48 2011] Keeping rmf generated by specextract
[Sun Oct 30 05:36:48 2011] 171.067
[Sun Oct 30 05:39:58 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:58 2011] Error reading totcts from fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 05:39:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:58 2011] Using photon index=1.80, rate=0.0135, arf fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:39:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:58 2011] Updating source flux to 1.8e-13
[Sun Oct 30 05:40:49 2011] Reading fit data from acisf10743/analysis//spectral/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 30 05:40:49 2011] Spectral fit parameter nH value = 3.47519e+22
[Sun Oct 30 05:40:49 2011] Spectral fit parameter PhoIndex value = 2.11001
[Sun Oct 30 05:40:49 2011] Failed to get F(0.3-8.0) from acisf10743/analysis//spectral/fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 05:40:49 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:40:49 2011] Using Nh = 3.5e+22, photon index=2.11, rate=0.0135, arf fullrun_ccd1_acisf10743_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:40:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:40:49 2011] Updating source flux to 3e-13