[Sun Oct 30 05:31:03 2011] Detection parameters:
  Position = (677.8, 1048.7) = 9 9 46.85 -9 47 6.2
  Extent = 0.9" x 0.5", rotation angle = 84 degrees
  Source counts = 15.5 +/- 4.4
  Background counts = 3.5
  Rate = 0.0002 +/- 5e-05

[Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 3.93'
[Sun Oct 30 05:32:58 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sun Oct 30 05:32:58 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.81"
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 05:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 22.995400, observed total counts = 23.000000
[Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 6 = 0.528112 pixels
[Sun Oct 30 05:33:15 2011] 22.846790 total counts/ 8.063090 bgd. counts: snr = 5.206338
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.528112 pixels
  Position = (678.0, 1049.1) = 9 9 46.86 -9 47 6.2
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.8 +/- 4.8
  Background counts = 8.1
  Rate = 0.0002 +/- 5e-05
[Sun Oct 30 05:33:15 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:15 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:15 2011] Source does appear to be extended
[Sun Oct 30 05:33:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:46 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sun Oct 30 05:33:46 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.144
[Sun Oct 30 05:33:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.67"
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5.csv
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5.csv
[Sun Oct 30 05:33:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Oct 30 05:33:47 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Oct 30 05:34:00 2011] Spatial fit model total counts = 22.991300, observed total counts = 23.000000
[Sun Oct 30 05:34:00 2011] Offset between fit and detection position for source 6 = 0.001881 pixels
[Sun Oct 30 05:34:00 2011] 22.842040 total counts/ 8.047940 bgd. counts: snr = 5.214902
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.001881 pixels
  Position = (678.0, 1049.1) = 9 9 46.86 -9 47 6.2
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.8 +/- 4.8
  Background counts = 8.0
  Rate = 0.0002 +/- 5e-05
[Sun Oct 30 05:34:00 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:00 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:00 2011] Source does appear to be extended
[Sun Oct 30 05:34:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:34:33 2011] Not overwriting source region fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 30 05:34:33 2011] Extracting stamp from image fullrun_ccd0_acisf10743_pi14-548_cl_sm2.00.img.gz, (647, 1018) - (709, 1080)
[Sun Oct 30 05:34:33 2011] Writing fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6.gif
[Sun Oct 30 05:34:46 2011] ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.evt and ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 30 05:34:46 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.evt.gz[events] = 19 counts
[Sun Oct 30 05:34:46 2011] Mean chipx,y = (821.95, 669.21)
[Sun Oct 30 05:34:46 2011] Mean tdetx,y = (3730.21, 4310.05)
[Sun Oct 30 05:34:46 2011] chipx,y range = (797.00-842.00, 653.00-689.00)
[Sun Oct 30 05:34:46 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 40 counts
[Sun Oct 30 05:34:46 2011] ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.img and ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 30 05:34:46 2011] ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.pi and ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 30 05:34:46 2011] Not generating rmf since there are only 14 counts
[Sun Oct 30 05:34:49 2011] ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 30 05:35:34 2011] 192.091
[Sun Oct 30 05:39:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:57 2011] Error reading totcts from fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 30 05:39:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:57 2011] Using photon index=1.80, rate=0.000157, arf fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src6.arf
[Sun Oct 30 05:39:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:57 2011] Updating source flux to 1.9e-15
[Sun Oct 30 05:40:03 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting