[Sun Oct 30 05:31:04 2011] Detection parameters:
  Position = (214.5, 739.0) = 9 10 2.27 -9 49 38.5
  Extent = 1.7" x 1.6", rotation angle = 114 degrees
  Source counts = 19.5 +/- 5.5
  Background counts = 10.5
  Rate = 0.0002 +/- 6e-05

[Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 8.08'
[Sun Oct 30 05:32:58 2011] Using EEF radius (= 2.89 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 2.89"
[Sun Oct 30 05:32:58 2011] source mask rpix=5.9, npix_max = 162, mask sum = 156, frac = 0.962
[Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 2.89"
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 05:33:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 92.483900, observed total counts = 92.000000
[Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 28 = 0.951850 pixels
[Sun Oct 30 05:33:15 2011] 92.714400 total counts/ 81.344400 bgd. counts: snr = 1.260656
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.951850 pixels
  Position = (214.2, 738.1) = 9 10 2.30 -9 49 39.2
  Extent = 0.7" x 0.7", rotation angle = 0
  Source counts = 11.4 +/- 9.6
  Background counts = 81.3
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability