[Sun Oct 30 05:31:04 2011] Detection parameters: Position = (473.5, 221.8) = 9 9 53.65 -9 53 53.0 Extent = 3.5" x 2.1", rotation angle = 125 degrees Source counts = 17.9 +/- 6.6 Background counts = 25.1 Rate = 0.0002 +/- 7e-05 [Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 10.89' [Sun Oct 30 05:32:58 2011] Using EEF radius (= 5.28 ")to estimate initial spatial extent for simple fitting [Sun Oct 30 05:32:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 5.28" [Sun Oct 30 05:32:58 2011] source mask rpix=10.7, npix_max = 503, mask sum = 479, frac = 0.951 [Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 5.28" [Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15.ximg exists [Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15.csv [Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15_1.ximg exists [Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15.csv [Sun Oct 30 05:33:00 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src15.ximg exists [Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists [Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly [Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 214.665000, observed total counts = 215.000000 [Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 22 = 2.474946 pixels [Sun Oct 30 05:33:15 2011] 215.404600 total counts/ 193.772000 bgd. counts: snr = 1.554044 Spatial fit parameters: Offset between fit and detection position for source 22 = 2.474946 pixels Position = (471.8, 223.6) = 9 9 53.73 -9 53 52.3 Extent = 2.7 (1.7-4.9)", rotation angle = 0 Source counts = 21.6 +/- 14.7 Background counts = 193.8 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability