[Sun Oct 30 05:31:02 2011] Detection parameters:
  Position = (597.7, 799.6) = 9 9 49.52 -9 49 8.7
  Extent = 2.3" x 1.3", rotation angle = 106 degrees
  Source counts = 108.1 +/- 11.4
  Background counts = 20.9
  Rate = 0.001 +/- 0.0001

[Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 6.07'
[Sun Oct 30 05:32:58 2011] Using EEF radius (= 1.67 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 1.67"
[Sun Oct 30 05:32:58 2011] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.928
[Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.67"
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 131.594000, observed total counts = 130.000000
[Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 2 = 0.858850 pixels
[Sun Oct 30 05:33:15 2011] 130.915600 total counts/ 42.688100 bgd. counts: snr = 13.503631
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.858850 pixels
  Position = (598.3, 800.2) = 9 9 49.51 -9 49 8.7
  Extent = 1.4 (1.2-1.8)", rotation angle = 0
  Source counts = 88.2 +/- 11.4
  Background counts = 42.7
  Rate = 0.0009 +/- 0.0001
[Sun Oct 30 05:33:15 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:15 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:15 2011] Source does appear to be extended
[Sun Oct 30 05:33:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:33:46 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Sun Oct 30 05:33:46 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.049
[Sun Oct 30 05:33:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.44"
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:33:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:33:47 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:34:00 2011] Spatial fit model total counts = 121.523000, observed total counts = 120.000000
[Sun Oct 30 05:34:00 2011] Offset between fit and detection position for source 2 = 0.157561 pixels
[Sun Oct 30 05:34:00 2011] 121.903400 total counts/ 41.229300 bgd. counts: snr = 12.564093
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.157561 pixels
  Position = (598.2, 800.0) = 9 9 49.52 -9 49 8.7
  Extent = 1.3 (1.0-1.7)", rotation angle = 0
  Source counts = 80.7 +/- 11.0
  Background counts = 41.2
  Rate = 0.0009 +/- 0.0001
[Sun Oct 30 05:34:00 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:00 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:00 2011] Source does appear to be extended
[Sun Oct 30 05:34:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:34:33 2011] Not overwriting source region fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 05:34:33 2011] Extracting stamp from image fullrun_ccd0_acisf10743_pi14-548_cl_sm2.00.img.gz, (539, 740) - (658, 860)
[Sun Oct 30 05:34:33 2011] Writing fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 05:34:35 2011] ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.evt and ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 05:34:35 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.evt.gz[events] = 111 counts
[Sun Oct 30 05:34:35 2011] Mean chipx,y = (651.72, 469.47)
[Sun Oct 30 05:34:35 2011] Mean tdetx,y = (3530.47, 4480.28)
[Sun Oct 30 05:34:35 2011] chipx,y range = (626.00-677.00, 446.00-492.00)
[Sun Oct 30 05:34:35 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 135 counts
[Sun Oct 30 05:34:35 2011] ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.img and ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 05:34:35 2011] ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.pi and ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 05:34:35 2011] Not generating rmf since there are only 80 counts
[Sun Oct 30 05:34:37 2011] ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 05:35:34 2011] 176.64
[Sun Oct 30 05:39:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:57 2011] Error reading totcts from fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 05:39:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:57 2011] Using photon index=1.80, rate=0.000857, arf fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 05:39:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:57 2011] Updating source flux to 1.1e-14
[Sun Oct 30 05:40:03 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 05:40:10 2011] acisf10743/analysis//spectral/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete