[Sun Oct 30 05:31:03 2011] Detection parameters:
  Position = (1010.4, 841.1) = 9 9 35.78 -9 48 48.3
  Extent = 1.0" x 0.6", rotation angle = 96 degrees
  Source counts = 15.2 +/- 4.4
  Background counts = 3.8
  Rate = 0.0002 +/- 5e-05

[Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 5.56'
[Sun Oct 30 05:32:58 2011] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Sun Oct 30 05:32:58 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.917
[Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.42"
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13.ximg exists
[Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13.csv
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Oct 30 05:33:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13.csv
[Sun Oct 30 05:33:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 35.477300, observed total counts = 35.000000
[Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 18 = 0.652603 pixels
[Sun Oct 30 05:33:15 2011] 35.108700 total counts/ 20.609500 bgd. counts: snr = 3.193819
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.652603 pixels
  Position = (1010.9, 841.6) = 9 9 35.78 -9 48 48.3
  Extent = 0.9 (0.5-1.8)", rotation angle = 0
  Source counts = 14.5 +/- 5.9
  Background counts = 20.6
  Rate = 0.0002 +/- 6e-05
[Sun Oct 30 05:33:15 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:15 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:15 2011] Source does appear to be extended
[Sun Oct 30 05:33:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:46 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sun Oct 30 05:33:46 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sun Oct 30 05:33:46 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.91"
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 05:33:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Oct 30 05:33:47 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Oct 30 05:34:00 2011] Spatial fit model total counts = 23.999200, observed total counts = 24.000000
[Sun Oct 30 05:34:00 2011] Offset between fit and detection position for source 18 = 0.485270 pixels
[Sun Oct 30 05:34:00 2011] 24.496300 total counts/ 11.346900 bgd. counts: snr = 3.903618
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.485270 pixels
  Position = (1010.8, 841.1) = 9 9 35.78 -9 48 48.5
  Extent = 0.8 (0.5-1.8)", rotation angle = 0
  Source counts = 13.1 +/- 4.9
  Background counts = 11.3
  Rate = 0.0001 +/- 5e-05
[Sun Oct 30 05:34:00 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:00 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:00 2011] Source does appear to be extended
[Sun Oct 30 05:34:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:34:33 2011] Not overwriting source region fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 30 05:34:33 2011] Extracting stamp from image fullrun_ccd0_acisf10743_pi14-548_cl_sm2.00.img.gz, (975, 806) - (1046, 877)
[Sun Oct 30 05:34:33 2011] Writing fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18.gif
[Sun Oct 30 05:35:07 2011] ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.evt and ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 30 05:35:07 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.evt.gz[events] = 20 counts
[Sun Oct 30 05:35:07 2011] Mean chipx,y = (467.00, 843.10)
[Sun Oct 30 05:35:07 2011] Mean tdetx,y = (3904.10, 4665.00)
[Sun Oct 30 05:35:07 2011] chipx,y range = (450.00-490.00, 826.00-858.00)
[Sun Oct 30 05:35:07 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 39 counts
[Sun Oct 30 05:35:07 2011] ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.img and ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 30 05:35:07 2011] ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.pi and ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Oct 30 05:35:07 2011] Not generating rmf since there are only 13 counts
[Sun Oct 30 05:35:10 2011] ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 30 05:35:34 2011] 181.974
[Sun Oct 30 05:39:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:57 2011] Error reading totcts from fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Oct 30 05:39:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:57 2011] Using photon index=1.80, rate=0.00014, arf fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src18.arf
[Sun Oct 30 05:39:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:58 2011] Updating source flux to 1.8e-15
[Sun Oct 30 05:40:03 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting