[Sun Oct 30 05:31:03 2011] Detection parameters:
  Position = (567.8, 1153.8) = 9 9 50.51 -9 46 14.4
  Extent = 0.6" x 0.5", rotation angle = 1 degrees
  Source counts = 46.0 +/- 7.0
  Background counts = 3.0
  Rate = 0.0005 +/- 7e-05

[Sun Oct 30 05:31:05 2011] Off-axis axis estimate = 3.61'
[Sun Oct 30 05:32:58 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:32:58 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sun Oct 30 05:32:58 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.034
[Sun Oct 30 05:32:58 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.72"
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7.csv
[Sun Oct 30 05:32:59 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Oct 30 05:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7.csv
[Sun Oct 30 05:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Oct 30 05:33:00 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Oct 30 05:33:00 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Oct 30 05:33:15 2011] Spatial fit model total counts = 58.146200, observed total counts = 62.000000
[Sun Oct 30 05:33:15 2011] Offset between fit and detection position for source 10 = 0.424239 pixels
[Sun Oct 30 05:33:15 2011] 59.376700 total counts/ 13.293200 bgd. counts: snr = 12.639523
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.424239 pixels
  Position = (568.2, 1153.9) = 9 9 50.51 -9 46 14.6
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 46.1 +/- 7.7
  Background counts = 13.3
  Rate = 0.0005 +/- 8e-05
[Sun Oct 30 05:33:15 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:33:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:33:15 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:33:15 2011] Source does appear to be extended
[Sun Oct 30 05:33:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:33:46 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sun Oct 30 05:33:46 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.083
[Sun Oct 30 05:33:46 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.70"
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7.csv
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Oct 30 05:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7.csv
[Sun Oct 30 05:33:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10743_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Oct 30 05:33:47 2011] fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Oct 30 05:33:47 2011] Fit fullrun_ccd0_acisf10743_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Oct 30 05:34:00 2011] Spatial fit model total counts = 58.719900, observed total counts = 63.000000
[Sun Oct 30 05:34:00 2011] Offset between fit and detection position for source 10 = 0.075400 pixels
[Sun Oct 30 05:34:00 2011] 59.650900 total counts/ 11.385500 bgd. counts: snr = 14.304078
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.075400 pixels
  Position = (568.2, 1153.9) = 9 9 50.51 -9 46 14.7
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 48.3 +/- 7.7
  Background counts = 11.4
  Rate = 0.0005 +/- 8e-05
[Sun Oct 30 05:34:00 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:34:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:34:00 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:34:00 2011] Source does appear to be extended
[Sun Oct 30 05:34:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:34:33 2011] Not overwriting source region fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 30 05:34:33 2011] Extracting stamp from image fullrun_ccd0_acisf10743_pi14-548_cl_sm2.00.img.gz, (534, 1120) - (602, 1188)
[Sun Oct 30 05:34:33 2011] Writing fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10.gif
[Sun Oct 30 05:34:52 2011] ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.evt and ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 30 05:34:52 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.evt.gz[events] = 59 counts
[Sun Oct 30 05:34:52 2011] Mean chipx,y = (968.63, 632.51)
[Sun Oct 30 05:34:52 2011] Mean tdetx,y = (3693.51, 4163.37)
[Sun Oct 30 05:34:52 2011] chipx,y range = (949.00-987.00, 613.00-652.00)
[Sun Oct 30 05:34:52 2011] Size of ../../acisf10743/products/events/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 33 counts
[Sun Oct 30 05:34:52 2011] ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.img and ../../acisf10743/products/images/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 30 05:34:52 2011] ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.pi and ../../acisf10743/products/spectra/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Oct 30 05:34:52 2011] Not generating rmf since there are only 48 counts
[Sun Oct 30 05:34:56 2011] ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.lc and ../../acisf10743/products/lightcurves/fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 30 05:35:34 2011] 180.852
[Sun Oct 30 05:39:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:39:57 2011] Error reading totcts from fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 30 05:39:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:39:57 2011] Using photon index=1.80, rate=0.000513, arf fullrun_ccd0_acisf10743_pi14-548_pass1_cl_src10.arf
[Sun Oct 30 05:39:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:39:57 2011] Updating source flux to 6.5e-15
[Sun Oct 30 05:40:03 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting