[Thu Sep 29 13:45:52 2011] Detection parameters:
  Position = (502.0, 960.7) = 12 41 31.76 44 23 35.0
  Extent = 0.9" x 0.5", rotation angle = 146 degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.5
  Rate = 0.001 +/- 0.0004

[Thu Sep 29 13:45:53 2011] Off-axis axis estimate = 2.85'
[Thu Sep 29 13:46:26 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:46:26 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Thu Sep 29 13:46:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.141
[Thu Sep 29 13:46:26 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.55"
[Thu Sep 29 13:46:27 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5.ximg exists
[Thu Sep 29 13:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 13:46:27 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Sep 29 13:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 13:46:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10729_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:46:27 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 13:46:27 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 13:46:27 2011] Fit fullrun_ccd6_acisf10729_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 13:46:34 2011] Spatial fit model total counts = 16.566100, observed total counts = 16.000000
[Thu Sep 29 13:46:34 2011] Offset between fit and detection position for source 3 = 1.214843 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.214843 pixels
  Position = (502.4, 961.8) = 12 41 31.76 44 23 35.3
  Extent = 1.0 (0.9-1.3)", rotation angle = 0
  Source counts = 16.7 +/- 4.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 13:46:34 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:46:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:46:34 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:46:34 2011] Source does appear to be extended
[Thu Sep 29 13:46:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:46:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:46:48 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Thu Sep 29 13:46:48 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Thu Sep 29 13:46:48 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.04"
[Thu Sep 29 13:46:48 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5.ximg exists
[Thu Sep 29 13:46:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 13:46:48 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Sep 29 13:46:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 13:46:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10729_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:46:48 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Sep 29 13:46:48 2011] fullrun_ccd6_acisf10729_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Sep 29 13:46:48 2011] Fit fullrun_ccd6_acisf10729_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Sep 29 13:46:52 2011] Spatial fit model total counts = 15.484800, observed total counts = 16.000000
[Thu Sep 29 13:46:52 2011] Offset between fit and detection position for source 3 = 0.097202 pixels
[Thu Sep 29 13:46:52 2011] 15.510100 total counts/ 0.000000 bgd. counts: snr = 430674970454.189758
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.097202 pixels
  Position = (502.4, 961.9) = 12 41 31.76 44 23 35.3
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 15.5 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 13:46:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:46:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:46:52 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:46:52 2011] Source does appear to be extended
[Thu Sep 29 13:46:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:47:25 2011] Not overwriting source region fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 29 13:47:25 2011] Extracting stamp from image fullrun_ccd6_acisf10729_pi14-548_cl_sm2.00.img.gz, (449, 909) - (555, 1015)
[Thu Sep 29 13:47:25 2011] Writing fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3.gif
[Thu Sep 29 13:47:38 2011] ../../acisf10729/products/events/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.evt and ../../acisf10729/products/events/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 29 13:47:38 2011] Size of ../../acisf10729/products/events/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Thu Sep 29 13:47:38 2011] Mean chipx,y = (880.25, 502.06)
[Thu Sep 29 13:47:38 2011] Mean tdetx,y = (3755.25, 2204.06)
[Thu Sep 29 13:47:38 2011] chipx,y range = (862.00-899.00, 483.00-519.00)
[Thu Sep 29 13:47:38 2011] Size of ../../acisf10729/products/events/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 20 counts
[Thu Sep 29 13:47:38 2011] ../../acisf10729/products/images/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.img and ../../acisf10729/products/images/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 29 13:47:38 2011] ../../acisf10729/products/spectra/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.pi and ../../acisf10729/products/spectra/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 29 13:47:38 2011] Not generating rmf since there are only 15 counts
[Thu Sep 29 13:47:41 2011] ../../acisf10729/products/lightcurves/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.lc and ../../acisf10729/products/lightcurves/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 29 13:48:17 2011] 204.398
[Thu Sep 29 13:48:51 2011] Updating aperture counts using extracted products
[Thu Sep 29 13:48:51 2011] Error reading totcts from fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 29 13:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 13:48:51 2011] Using photon index=1.80, rate=0.00163, arf fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3.arf
[Thu Sep 29 13:48:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 13:48:51 2011] Updating source flux to 1.8e-14
[Thu Sep 29 13:48:56 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 13:48:57 2011] acisf10729/analysis//spectral/fullrun_ccd6_acisf10729_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete