[Mon Oct 17 02:36:41 2011] Detection parameters:
  Position = (544.3, 521.7) = 9 52 9.71 21 39 42.5
  Extent = 1.0" x 0.5", rotation angle = 41 degrees
  Source counts = 16.5 +/- 4.2
  Background counts = 1.5
  Rate = 0.001 +/- 0.0003

[Mon Oct 17 02:36:41 2011] Off-axis axis estimate = 3.81'
[Mon Oct 17 02:37:11 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 02:37:11 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Mon Oct 17 02:37:11 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Mon Oct 17 02:37:11 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.77"
[Mon Oct 17 02:37:12 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 17 02:37:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 02:37:12 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 17 02:37:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 02:37:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10728_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 02:37:12 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 17 02:37:12 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 17 02:37:12 2011] Fit fullrun_ccd7_acisf10728_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 17 02:37:17 2011] Spatial fit model total counts = 21.861800, observed total counts = 22.000000
[Mon Oct 17 02:37:17 2011] Offset between fit and detection position for source 18 = 0.888131 pixels
[Mon Oct 17 02:37:17 2011] 21.683660 total counts/ 7.488760 bgd. counts: snr = 5.187133
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.888131 pixels
  Position = (544.9, 522.3) = 9 52 9.71 21 39 42.6
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 14.2 +/- 4.7
  Background counts = 7.5
  Rate = 0.0008 +/- 0.0003
[Mon Oct 17 02:37:17 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 02:37:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 02:37:17 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 02:37:17 2011] Source does appear to be extended
[Mon Oct 17 02:37:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 02:37:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 02:37:29 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Mon Oct 17 02:37:29 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.971
[Mon Oct 17 02:37:29 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.75"
[Mon Oct 17 02:37:30 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 17 02:37:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 02:37:30 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 17 02:37:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 02:37:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10728_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 02:37:30 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 17 02:37:30 2011] fullrun_ccd7_acisf10728_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 17 02:37:30 2011] Fit fullrun_ccd7_acisf10728_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 17 02:37:35 2011] Spatial fit model total counts = 22.996500, observed total counts = 23.000000
[Mon Oct 17 02:37:35 2011] Offset between fit and detection position for source 18 = 0.047288 pixels
[Mon Oct 17 02:37:35 2011] 23.109370 total counts/ 9.279570 bgd. counts: snr = 4.539959
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.047288 pixels
  Position = (544.8, 522.3) = 9 52 9.71 21 39 42.6
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 13.8 +/- 4.8
  Background counts = 9.3
  Rate = 0.0008 +/- 0.0003
[Mon Oct 17 02:37:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 02:37:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 02:37:35 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 02:37:35 2011] Source does appear to be extended
[Mon Oct 17 02:37:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 02:38:32 2011] Not overwriting source region fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 17 02:38:32 2011] Extracting stamp from image fullrun_ccd7_acisf10728_pi14-548_cl_sm2.00.img.gz, (512, 489) - (578, 555)
[Mon Oct 17 02:38:32 2011] Writing fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18.gif
[Mon Oct 17 02:38:56 2011] ../../acisf10728/products/events/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.evt and ../../acisf10728/products/events/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon Oct 17 02:38:56 2011] Size of ../../acisf10728/products/events/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.evt.gz[events] = 17 counts
[Mon Oct 17 02:38:56 2011] Mean chipx,y = (603.88, 714.29)
[Mon Oct 17 02:38:56 2011] Mean tdetx,y = (4520.88, 2416.29)
[Mon Oct 17 02:38:56 2011] chipx,y range = (592.00-626.00, 697.00-730.00)
[Mon Oct 17 02:38:56 2011] Size of ../../acisf10728/products/events/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 17 counts
[Mon Oct 17 02:38:56 2011] ../../acisf10728/products/images/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.img and ../../acisf10728/products/images/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon Oct 17 02:38:56 2011] ../../acisf10728/products/spectra/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.pi and ../../acisf10728/products/spectra/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon Oct 17 02:38:56 2011] Not generating rmf since there are only 13 counts
[Mon Oct 17 02:38:58 2011] ../../acisf10728/products/lightcurves/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.lc and ../../acisf10728/products/lightcurves/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon Oct 17 02:39:26 2011] 222.17
[Mon Oct 17 02:39:28 2011] Updating aperture counts using extracted products
[Mon Oct 17 02:39:28 2011] Error reading totcts from fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 17 02:39:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 02:39:28 2011] Using photon index=1.80, rate=0.000817, arf fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18.arf
[Mon Oct 17 02:39:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 02:39:28 2011] Updating source flux to 6.3e-15
[Mon Oct 17 02:39:33 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 02:39:34 2011] acisf10728/analysis//spectral/fullrun_ccd7_acisf10728_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete