[Mon Oct 24 18:10:13 2011] Detection parameters:
  Position = (357.6, 346.5) = 9 52 7.63 21 35 11.8
  Extent = 1.0" x 0.9", rotation angle = 4 degrees
  Source counts = 72.7 +/- 8.9
  Background counts = 7.3
  Rate = 0.004 +/- 0.0005

[Mon Oct 24 18:10:14 2011] Off-axis axis estimate = 7.75'
[Mon Oct 24 18:10:53 2011] Using EEF radius (= 2.66 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 18:10:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 18:10:53 2011] Initial guess for spatial extent in simple fitting = 2.66"
[Mon Oct 24 18:10:53 2011] source mask rpix=5.4, npix_max = 139, mask sum = 121, frac = 0.868
[Mon Oct 24 18:10:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.66"
[Mon Oct 24 18:10:53 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 18:10:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 18:10:53 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 18:10:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 18:10:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10727_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 18:10:53 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 18:10:53 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 18:10:53 2011] Fit fullrun_ccd6_acisf10727_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 18:10:58 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 30.510348 pixels away
[Mon Oct 24 18:10:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 18:10:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 18:10:58 2011] Assessing source extent using major
[Mon Oct 24 18:10:58 2011] Source does appear to be extended
[Mon Oct 24 18:10:58 2011] Computing asymmetry using major and minor axis, asym = 1.21
[Mon Oct 24 18:11:14 2011] Using EEF radius (= 2.66 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 18:11:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 18:11:14 2011] Initial guess for spatial extent in simple fitting = 2.66"
[Mon Oct 24 18:11:14 2011] source mask rpix=5.4, npix_max = 139, mask sum = 121, frac = 0.868
[Mon Oct 24 18:11:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.66"
[Mon Oct 24 18:11:15 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 18:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 18:11:15 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 18:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 18:11:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10727_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 18:11:15 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 18:11:15 2011] fullrun_ccd6_acisf10727_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 18:11:15 2011] Fit fullrun_ccd6_acisf10727_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 18:11:20 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon Oct 24 18:11:20 2011] Spatial fit model total counts = 145.167000, observed total counts = 148.000000
[Mon Oct 24 18:11:20 2011] Offset between fit and detection position for source 1 = 4.567589 pixels
[Mon Oct 24 18:11:20 2011] Warning, changing simple spatial fit ID from 1 to 2
[Mon Oct 24 18:11:20 2011] 146.870323 total counts/ 0.738323 bgd. counts: snr = 170.067814
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.567589 pixels
  Position = (361.6, 344.4) = 9 52 7.51 21 35 10.5
  Extent = 3.5 (3.1-4.0)", rotation angle = 0
  Source counts = 146.1 +/- 12.1
  Background counts = 0.7
  Rate = 0.009 +/- 0.0007
[Mon Oct 24 18:11:20 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 18:11:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 18:11:20 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 18:11:20 2011] Source does appear to be extended
[Mon Oct 24 18:11:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 18:11:20 2011] Source is confused with source 3
[Mon Oct 24 18:11:53 2011] Not overwriting source region fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 18:11:53 2011] Extracting stamp from image fullrun_ccd6_acisf10727_pi14-548_cl_sm2.00.img.gz, (201, 184) - (522, 505)
[Mon Oct 24 18:11:53 2011] Writing fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 18:11:55 2011] ../../acisf10727/products/events/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.evt and ../../acisf10727/products/events/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 18:11:55 2011] Size of ../../acisf10727/products/events/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.evt.gz[events] = 165 counts
[Mon Oct 24 18:11:55 2011] Mean chipx,y = (406.99, 41.32)
[Mon Oct 24 18:11:55 2011] Mean tdetx,y = (3281.99, 1743.32)
[Mon Oct 24 18:11:55 2011] chipx,y range = (376.00-448.00, 17.00-72.00)
[Mon Oct 24 18:11:55 2011] Size of ../../acisf10727/products/events/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 126 counts
[Mon Oct 24 18:11:55 2011] ../../acisf10727/products/images/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.img and ../../acisf10727/products/images/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 18:11:55 2011] ../../acisf10727/products/spectra/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.pi and ../../acisf10727/products/spectra/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 18:11:58 2011] ../../acisf10727/products/lightcurves/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.lc and ../../acisf10727/products/lightcurves/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 18:12:27 2011] Keeping rmf generated by specextract
[Mon Oct 24 18:12:27 2011] 172.76
[Mon Oct 24 18:13:09 2011] Updating aperture counts using extracted products
[Mon Oct 24 18:13:09 2011] Error reading totcts from fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 18:13:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 18:13:09 2011] Using photon index=1.80, rate=0.00873, arf fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 18:13:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 18:13:09 2011] Updating source flux to 1.2e-13
[Mon Oct 24 18:13:14 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Oct 24 18:13:18 2011] Reading fit data from acisf10727/analysis//spectral/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 24 18:13:18 2011] Spectral fit parameter nH value = 6.43157e+21
[Mon Oct 24 18:13:18 2011] Spectral fit parameter PhoIndex value = 2.04903
[Mon Oct 24 18:13:18 2011] Failed to get F(0.3-8.0) from acisf10727/analysis//spectral/fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 18:13:18 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 18:13:18 2011] Using Nh = 6.4e+21, photon index=2.05, rate=0.00873, arf fullrun_ccd6_acisf10727_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 18:13:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 18:13:18 2011] Updating source flux to 1.2e-13