[Wed Oct 19 04:04:50 2011] Detection parameters:
  Position = (74.0, 936.2) = 13 26 33.31 -42 50 58.9
  Extent = 3.4" x 1.2", rotation angle = 77 degrees
  Source counts = 11.2 +/- 3.7
  Background counts = 2.8
  Rate = 0.002 +/- 0.0007

[Wed Oct 19 04:04:50 2011] Off-axis axis estimate = 10.42'
[Wed Oct 19 04:05:36 2011] Using EEF radius (= 4.81 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:05:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:05:36 2011] Initial guess for spatial extent in simple fitting = 4.81"
[Wed Oct 19 04:05:36 2011] source mask rpix=9.8, npix_max = 422, mask sum = 400, frac = 0.946
[Wed Oct 19 04:05:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.81"
[Wed Oct 19 04:05:36 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 04:05:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 04:05:36 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 04:05:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 04:05:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10726_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:05:36 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 04:05:36 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 04:05:36 2011] Fit fullrun_ccd3_acisf10726_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 04:05:48 2011] Spatial fit model total counts = 18.955900, observed total counts = 19.000000
[Wed Oct 19 04:05:48 2011] Offset between fit and detection position for source 6 = 0.552973 pixels
[Wed Oct 19 04:05:48 2011] 18.899950 total counts/ 7.032750 bgd. counts: snr = 4.474924
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.552973 pixels
  Position = (74.1, 935.7) = 13 26 33.33 -42 50 59.4
  Extent = 2.9 (1.5-4.9)", rotation angle = 0
  Source counts = 11.9 +/- 4.3
  Background counts = 7.0
  Rate = 0.002 +/- 0.0009
[Wed Oct 19 04:05:48 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:05:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:05:48 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:05:48 2011] Source does appear to be extended
[Wed Oct 19 04:05:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:06:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:06:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:06:08 2011] Initial guess for spatial extent in simple fitting = 2.89"
[Wed Oct 19 04:06:08 2011] source mask rpix=5.9, npix_max = 163, mask sum = 156, frac = 0.957
[Wed Oct 19 04:06:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.89"
[Wed Oct 19 04:06:09 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 04:06:09 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 04:06:09 2011] Fit fullrun_ccd3_acisf10726_pi14-548_cl_pass1_src3 appears to have run properly
[Wed Oct 19 04:06:09 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 04:06:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Oct 19 04:06:09 2011] fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 04:06:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Oct 19 04:06:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10726_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:06:20 2011] Spatial fit model total counts = 13.260300, observed total counts = 14.000000
[Wed Oct 19 04:06:20 2011] Offset between fit and detection position for source 6 = 0.775689 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.775689 pixels
  Position = (74.8, 935.8) = 13 26 33.29 -42 50 59.3
  Extent = 4.0 (2.7-5.8)" x 1.7 (1.2-2.6)", rotation angle = 102 (84-129) degrees
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.003 +/- 0.0007
[Wed Oct 19 04:06:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:06:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:06:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:06:20 2011] Source does appear to be extended
[Wed Oct 19 04:06:20 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Wed Oct 19 04:08:30 2011] Not overwriting source region fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.reg
[Wed Oct 19 04:08:30 2011] Extracting stamp from image fullrun_ccd3_acisf10726_pi14-548_cl_sm2.00.img.gz, (0, 752) - (258, 1093)
[Wed Oct 19 04:08:30 2011] Writing fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6.gif
[Wed Oct 19 04:08:36 2011] ../../acisf10726/products/events/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.evt and ../../acisf10726/products/events/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Oct 19 04:08:36 2011] Size of ../../acisf10726/products/events/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts
[Wed Oct 19 04:08:36 2011] Mean chipx,y = (83.40, 93.33)
[Wed Oct 19 04:08:36 2011] Mean tdetx,y = (5038.67, 3144.40)
[Wed Oct 19 04:08:36 2011] chipx,y range = (61.00-98.00, 59.00-129.00)
[Wed Oct 19 04:08:37 2011] Size of ../../acisf10726/products/events/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 55 counts
[Wed Oct 19 04:08:37 2011] ../../acisf10726/products/images/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.img and ../../acisf10726/products/images/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Oct 19 04:08:37 2011] ../../acisf10726/products/spectra/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.pi and ../../acisf10726/products/spectra/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Oct 19 04:08:37 2011] Not generating rmf since there are only 13 counts
[Wed Oct 19 04:08:41 2011] ../../acisf10726/products/lightcurves/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.lc and ../../acisf10726/products/lightcurves/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Oct 19 04:08:53 2011] 155.302
[Wed Oct 19 04:08:56 2011] Updating aperture counts using extracted products
[Wed Oct 19 04:08:56 2011] Error reading totcts from fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct 19 04:08:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:08:56 2011] Using photon index=1.80, rate=0.00256, arf fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6.arf
[Wed Oct 19 04:08:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:08:57 2011] Updating source flux to 3.8e-14
[Wed Oct 19 04:09:27 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 04:09:28 2011] acisf10726/analysis//spectral/fullrun_ccd3_acisf10726_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete