[Thu Oct  6 06:50:02 2011] Detection parameters:
  Position = (596.5, 312.6) = 13 25 27.48 -43 1 28.0
  Extent = 0.7" x 0.5", rotation angle = 110 degrees
  Source counts = 22.5 +/- 5.6
  Background counts = 8.5
  Rate = 0.005 +/- 0.001

[Thu Oct  6 06:50:05 2011] Off-axis axis estimate = 2.74'
[Thu Oct  6 06:50:57 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:50:57 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Thu Oct  6 06:50:57 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.901
[Thu Oct  6 06:50:57 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.53"
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16.csv
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16_1.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16.csv
[Thu Oct  6 06:50:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:01 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu Oct  6 06:51:01 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Oct  6 06:51:01 2011] Fit fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Oct  6 06:51:13 2011] Spatial fit model total counts = 67.619400, observed total counts = 68.000000
[Thu Oct  6 06:51:13 2011] Offset between fit and detection position for source 8 = 0.641766 pixels
[Thu Oct  6 06:51:13 2011] 68.220500 total counts/ 48.200000 bgd. counts: snr = 2.883709
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.641766 pixels
  Position = (597.1, 312.9) = 13 25 27.48 -43 1 28.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 20.0 +/- 8.3
  Background counts = 48.2
  Rate = 0.004 +/- 0.002
[Thu Oct  6 06:51:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:13 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:13 2011] Source does appear to be extended
[Thu Oct  6 06:51:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:51:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:51:33 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Oct  6 06:51:33 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.037
[Thu Oct  6 06:51:33 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.48"
[Thu Oct  6 06:51:34 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16.ximg exists
[Thu Oct  6 06:51:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16.csv
[Thu Oct  6 06:51:34 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16_1.ximg exists
[Thu Oct  6 06:51:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16.csv
[Thu Oct  6 06:51:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:35 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Thu Oct  6 06:51:35 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Oct  6 06:51:35 2011] Fit fullrun_ccd3_acisf10725_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Oct  6 06:51:45 2011] Spatial fit model total counts = 66.003600, observed total counts = 66.000000
[Thu Oct  6 06:51:45 2011] Offset between fit and detection position for source 8 = 0.004855 pixels
[Thu Oct  6 06:51:45 2011] 65.767700 total counts/ 45.106400 bgd. counts: snr = 3.076370
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.004855 pixels
  Position = (597.1, 312.9) = 13 25 27.48 -43 1 28.1
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.7 +/- 8.1
  Background counts = 45.1
  Rate = 0.004 +/- 0.002
[Thu Oct  6 06:51:45 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:45 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:45 2011] Source does appear to be extended
[Thu Oct  6 06:51:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:54:18 2011] Not overwriting source region fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.reg
[Thu Oct  6 06:54:18 2011] Extracting stamp from image fullrun_ccd3_acisf10725_pi14-548_cl_sm2.00.img.gz, (575, 291) - (619, 335)
[Thu Oct  6 06:54:18 2011] Writing fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8.gif
[Thu Oct  6 06:55:20 2011] ../../acisf10725/products/events/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.evt and ../../acisf10725/products/events/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Thu Oct  6 06:55:20 2011] Size of ../../acisf10725/products/events/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.evt.gz[events] = 28 counts
[Thu Oct  6 06:55:20 2011] Mean chipx,y = (821.86, 715.89)
[Thu Oct  6 06:55:20 2011] Mean tdetx,y = (4416.11, 3882.86)
[Thu Oct  6 06:55:20 2011] chipx,y range = (805.00-838.00, 697.00-732.00)
[Thu Oct  6 06:55:20 2011] Size of ../../acisf10725/products/events/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 100 counts
[Thu Oct  6 06:55:20 2011] ../../acisf10725/products/images/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.img and ../../acisf10725/products/images/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Thu Oct  6 06:55:20 2011] ../../acisf10725/products/spectra/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.pi and ../../acisf10725/products/spectra/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Thu Oct  6 06:55:20 2011] Not generating rmf since there are only 20 counts
[Thu Oct  6 06:55:23 2011] ../../acisf10725/products/lightcurves/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.lc and ../../acisf10725/products/lightcurves/fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Thu Oct  6 06:55:38 2011] 198.185
[Thu Oct  6 06:55:41 2011] Updating aperture counts using extracted products
[Thu Oct  6 06:55:41 2011] Error reading totcts from fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8_src.pi.gz
[Thu Oct  6 06:55:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 06:55:42 2011] Using photon index=1.80, rate=0.00415, arf fullrun_ccd3_acisf10725_pi14-548_pass1_cl_src8.arf
[Thu Oct  6 06:55:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 06:55:42 2011] Updating source flux to 4.7e-14
[Thu Oct  6 06:55:52 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting