[Thu Oct  6 06:50:04 2011] Detection parameters:
  Position = (1062.6, 565.0) = 13 25 6.59 -42 59 23.6
  Extent = 1.4" x 0.5", rotation angle = 22 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.002 +/- 0.0007

[Thu Oct  6 06:50:05 2011] Off-axis axis estimate = 6.99'
[Thu Oct  6 06:50:57 2011] Using EEF radius (= 2.17 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:50:57 2011] Initial guess for spatial extent in simple fitting = 2.17"
[Thu Oct  6 06:50:57 2011] source mask rpix=4.4, npix_max = 96, mask sum = 100, frac = 1.033
[Thu Oct  6 06:50:57 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 2.17"
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32.csv
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32_1.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32.csv
[Thu Oct  6 06:50:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:02 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Thu Oct  6 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32.csv
[Thu Oct  6 06:51:02 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Oct  6 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32.csv
[Thu Oct  6 06:51:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:13 2011] Spatial fit model total counts = 21.045700, observed total counts = 19.000000
[Thu Oct  6 06:51:13 2011] Offset between fit and detection position for source 40 = 0.697259 pixels
[Thu Oct  6 06:51:13 2011] 21.118120 total counts/ 13.827600 bgd. counts: snr = 1.960582
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.697259 pixels
  Position = (1061.9, 565.1) = 13 25 6.64 -42 59 23.8
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 7.3 +/- 4.6
  Background counts = 13.8
  Rate = 0.001 +/- 0.0009
[Thu Oct  6 06:51:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:13 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:13 2011] Source does appear to be extended
[Thu Oct  6 06:51:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:51:13 2011] Deleting source due to low Poisson probability 0.8