[Thu Oct  6 06:50:03 2011] Detection parameters:
  Position = (304.9, 340.7) = 13 25 40.57 -43 1 14.2
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.002 +/- 0.0007

[Thu Oct  6 06:50:05 2011] Off-axis axis estimate = 2.33'
[Thu Oct  6 06:50:57 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:50:57 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Oct  6 06:50:57 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.068
[Thu Oct  6 06:50:57 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.47"
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33.csv
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33_1.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33.csv
[Thu Oct  6 06:50:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:02 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Thu Oct  6 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33.csv
[Thu Oct  6 06:51:02 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Oct  6 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33.csv
[Thu Oct  6 06:51:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:13 2011] Spatial fit model total counts = 12.117300, observed total counts = 14.000000
[Thu Oct  6 06:51:13 2011] Offset between fit and detection position for source 30 = 0.724235 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.724235 pixels
  Position = (305.3, 341.3) = 13 25 40.57 -43 1 14.2
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0007
[Thu Oct  6 06:51:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:13 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:13 2011] Source does appear to be extended
[Thu Oct  6 06:51:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:51:13 2011] Deleting source due to low Poisson probability 0.9