[Thu Oct  6 06:50:03 2011] Detection parameters:
  Position = (1038.6, 553.4) = 13 25 7.66 -42 59 29.3
  Extent = 1.6" x 0.8", rotation angle = 10 degrees
  Source counts = 12.7 +/- 3.7
  Background counts = 1.3
  Rate = 0.003 +/- 0.0008

[Thu Oct  6 06:50:05 2011] Off-axis axis estimate = 6.78'
[Thu Oct  6 06:50:57 2011] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:50:57 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Thu Oct  6 06:50:57 2011] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.931
[Thu Oct  6 06:50:57 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 2.05"
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27.csv
[Thu Oct  6 06:50:58 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27_1.ximg exists
[Thu Oct  6 06:50:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27.csv
[Thu Oct  6 06:50:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:01 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Thu Oct  6 06:51:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27.csv
[Thu Oct  6 06:51:01 2011] fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Oct  6 06:51:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27.csv
[Thu Oct  6 06:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10725_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:13 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 21.872876 pixels away
[Thu Oct  6 06:51:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:13 2011] Assessing source extent using major
[Thu Oct  6 06:51:13 2011] Source does appear to be extended
[Thu Oct  6 06:51:13 2011] Computing asymmetry using major and minor axis, asym = 1.91
[Thu Oct  6 06:51:13 2011] Source is asymmetric
[Thu Oct  6 06:51:13 2011] Deleting source due to low Poisson probability 0.9