[Thu Oct  6 06:49:56 2011] Detection parameters:
  Position = (797.4, 530.4) = 13 25 41.99 -43 10 41.6
  Extent = 2.2" x 1.7", rotation angle = 133 degrees
  Source counts = 73.0 +/- 8.8
  Background counts = 5.0
  Rate = 0.01 +/- 0.002

[Thu Oct  6 06:49:58 2011] Off-axis axis estimate = 7.24'
[Thu Oct  6 06:50:54 2011] Using EEF radius (= 2.33 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:50:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 06:50:54 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Thu Oct  6 06:50:54 2011] source mask rpix=4.7, npix_max = 109, mask sum = 121, frac = 1.105
[Thu Oct  6 06:50:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.33"
[Thu Oct  6 06:50:55 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 06:50:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 06:50:55 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 06:50:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 06:50:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10725_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:50:55 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 06:50:55 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 06:50:55 2011] Fit fullrun_ccd0_acisf10725_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 06:51:06 2011] Spatial fit model total counts = 81.839500, observed total counts = 81.000000
[Thu Oct  6 06:51:06 2011] Offset between fit and detection position for source 1 = 0.423290 pixels
[Thu Oct  6 06:51:06 2011] 81.923570 total counts/ 5.509170 bgd. counts: snr = 32.556081
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.423290 pixels
  Position = (797.6, 530.8) = 13 25 42.00 -43 10 41.7
  Extent = 2.5 (2.2-3.0)", rotation angle = 0
  Source counts = 76.4 +/- 9.1
  Background counts = 5.5
  Rate = 0.02 +/- 0.002
[Thu Oct  6 06:51:06 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:06 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:06 2011] Source does appear to be extended
[Thu Oct  6 06:51:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:51:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:51:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 06:51:30 2011] Initial guess for spatial extent in simple fitting = 2.50"
[Thu Oct  6 06:51:30 2011] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.975
[Thu Oct  6 06:51:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.50"
[Thu Oct  6 06:51:31 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 06:51:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 06:51:31 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 06:51:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 06:51:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10725_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:51:31 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 06:51:31 2011] fullrun_ccd0_acisf10725_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 06:51:31 2011] Fit fullrun_ccd0_acisf10725_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 06:51:39 2011] Spatial fit model total counts = 83.083500, observed total counts = 83.000000
[Thu Oct  6 06:51:39 2011] Offset between fit and detection position for source 1 = 0.090382 pixels
[Thu Oct  6 06:51:39 2011] 82.985560 total counts/ 8.177560 bgd. counts: snr = 26.159906
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.090382 pixels
  Position = (797.7, 530.8) = 13 25 42.00 -43 10 41.6
  Extent = 2.5 (2.2-2.9)", rotation angle = 0
  Source counts = 74.8 +/- 9.1
  Background counts = 8.2
  Rate = 0.02 +/- 0.002
[Thu Oct  6 06:51:39 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:51:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:51:39 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:51:39 2011] Source does appear to be extended
[Thu Oct  6 06:51:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:52:02 2011] Not overwriting source region fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.reg
[Thu Oct  6 06:52:02 2011] Extracting stamp from image fullrun_ccd0_acisf10725_pi14-548_cl_sm2.00.img.gz, (685, 418) - (911, 644)
[Thu Oct  6 06:52:02 2011] Writing fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1.gif
[Thu Oct  6 06:52:03 2011] ../../acisf10725/products/events/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.evt and ../../acisf10725/products/events/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct  6 06:52:03 2011] Size of ../../acisf10725/products/events/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Thu Oct  6 06:52:03 2011] Mean chipx,y = (358.80, 592.44)
[Thu Oct  6 06:52:03 2011] Mean tdetx,y = (3653.44, 4773.20)
[Thu Oct  6 06:52:03 2011] chipx,y range = (332.00-386.00, 565.00-620.00)
[Thu Oct  6 06:52:03 2011] Size of ../../acisf10725/products/events/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 34 counts
[Thu Oct  6 06:52:03 2011] ../../acisf10725/products/images/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.img and ../../acisf10725/products/images/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct  6 06:52:03 2011] ../../acisf10725/products/spectra/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.pi and ../../acisf10725/products/spectra/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct  6 06:52:03 2011] Not generating rmf since there are only 74 counts
[Thu Oct  6 06:52:06 2011] ../../acisf10725/products/lightcurves/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.lc and ../../acisf10725/products/lightcurves/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct  6 06:52:51 2011] 176.125
[Thu Oct  6 06:55:40 2011] Updating aperture counts using extracted products
[Thu Oct  6 06:55:40 2011] Error reading totcts from fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct  6 06:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 06:55:41 2011] Using photon index=1.80, rate=0.015, arf fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 06:55:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 06:55:41 2011] Updating source flux to 1.9e-13
[Thu Oct  6 06:55:44 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 06:55:45 2011] acisf10725/analysis//spectral/fullrun_ccd0_acisf10725_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete