[Sat Oct 22 05:28:49 2011] Detection parameters:
  Position = (515.1, 663.9) = 13 25 7.41 -43 4 9.4
  Extent = 0.7" x 0.5", rotation angle = 95 degrees
  Source counts = 77.8 +/- 8.9
  Background counts = 1.2
  Rate = 0.02 +/- 0.002

[Sat Oct 22 05:28:51 2011] Off-axis axis estimate = 4.06'
[Sat Oct 22 05:29:40 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:29:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:29:40 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Sat Oct 22 05:29:40 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Sat Oct 22 05:29:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.85"
[Sat Oct 22 05:29:40 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:29:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:40 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:29:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10724_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:29:40 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:29:40 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:29:40 2011] Fit fullrun_ccd3_acisf10724_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:29:51 2011] Spatial fit model total counts = 82.229000, observed total counts = 91.000000
[Sat Oct 22 05:29:51 2011] Offset between fit and detection position for source 3 = 0.931761 pixels
[Sat Oct 22 05:29:51 2011] 82.394690 total counts/ 7.665190 bgd. counts: snr = 26.991723
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.931761 pixels
  Position = (515.7, 664.7) = 13 25 7.41 -43 4 9.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 74.7 +/- 9.1
  Background counts = 7.7
  Rate = 0.01 +/- 0.002
[Sat Oct 22 05:29:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:29:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:29:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:29:51 2011] Source does appear to be extended
[Sat Oct 22 05:29:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:30:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:30:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:30:12 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 22 05:30:12 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.065
[Sat Oct 22 05:30:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Sat Oct 22 05:30:13 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:30:13 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:30:13 2011] Fit fullrun_ccd3_acisf10724_pi14-548_cl_pass1_src1 appears to have run properly
[Sat Oct 22 05:30:13 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Oct 22 05:30:13 2011] fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Oct 22 05:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10724_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:30:21 2011] Spatial fit model total counts = 81.787800, observed total counts = 91.000000
[Sat Oct 22 05:30:21 2011] Offset between fit and detection position for source 3 = 0.009629 pixels
[Sat Oct 22 05:30:21 2011] 82.034380 total counts/ 8.848880 bgd. counts: snr = 24.602594
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009629 pixels
  Position = (515.7, 664.7) = 13 25 7.41 -43 4 9.3
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 73.2 +/- 9.1
  Background counts = 8.8
  Rate = 0.01 +/- 0.002
[Sat Oct 22 05:30:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:30:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:30:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:30:21 2011] Source does appear to be extended
[Sat Oct 22 05:30:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:33:04 2011] Not overwriting source region fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 22 05:33:04 2011] Extracting stamp from image fullrun_ccd3_acisf10724_pi14-548_cl_sm2.00.img.gz, (484, 633) - (547, 696)
[Sat Oct 22 05:33:04 2011] Writing fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3.gif
[Sat Oct 22 05:33:06 2011] ../../acisf10724/products/events/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.evt and ../../acisf10724/products/events/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 22 05:33:06 2011] Size of ../../acisf10724/products/events/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.evt.gz[events] = 85 counts
[Sat Oct 22 05:33:06 2011] Mean chipx,y = (648.89, 628.84)
[Sat Oct 22 05:33:06 2011] Mean tdetx,y = (4503.16, 3709.89)
[Sat Oct 22 05:33:06 2011] chipx,y range = (627.00-669.00, 612.00-650.00)
[Sat Oct 22 05:33:06 2011] Size of ../../acisf10724/products/events/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 9 counts
[Sat Oct 22 05:33:06 2011] ../../acisf10724/products/images/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.img and ../../acisf10724/products/images/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 22 05:33:06 2011] ../../acisf10724/products/spectra/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.pi and ../../acisf10724/products/spectra/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 22 05:33:06 2011] Not generating rmf since there are only 73 counts
[Sat Oct 22 05:33:08 2011] ../../acisf10724/products/lightcurves/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.lc and ../../acisf10724/products/lightcurves/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 22 05:34:21 2011] 178.429
[Sat Oct 22 05:34:26 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:34:26 2011] Error reading totcts from fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 22 05:34:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:34:26 2011] Using photon index=1.80, rate=0.0143, arf fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 05:34:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:34:26 2011] Updating source flux to 1.8e-13
[Sat Oct 22 05:34:54 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 05:34:55 2011] acisf10724/analysis//spectral/fullrun_ccd3_acisf10724_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete