[Sat Oct 22 05:28:46 2011] Detection parameters: Position = (256.3, 924.9) = 13 25 56.96 -42 56 54.4 Extent = 2.6" x 1.2", rotation angle = 128 degrees Source counts = 17.9 +/- 4.7 Background counts = 4.1 Rate = 0.004 +/- 0.0009 [Sat Oct 22 05:28:48 2011] Off-axis axis estimate = 8.78' [Sat Oct 22 05:29:36 2011] Using EEF radius (= 3.40 ")to estimate initial spatial extent for simple fitting [Sat Oct 22 05:29:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 22 05:29:36 2011] Initial guess for spatial extent in simple fitting = 3.40" [Sat Oct 22 05:29:36 2011] source mask rpix=6.9, npix_max = 220, mask sum = 225, frac = 1.022 [Sat Oct 22 05:29:36 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 3.40" [Sat Oct 22 05:29:37 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19.ximg exists [Sat Oct 22 05:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19.csv [Sat Oct 22 05:29:37 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19_1.ximg exists [Sat Oct 22 05:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19.csv [Sat Oct 22 05:29:37 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 22 05:29:38 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19.ximg exists [Sat Oct 22 05:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19.csv [Sat Oct 22 05:29:38 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists [Sat Oct 22 05:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19.csv [Sat Oct 22 05:29:38 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 22 05:29:50 2011] Source 20 is offset by 1.587018 and -3.390211 pixels which is larger than 2 X fitted extent = 3.385833 x 3.385833, not incorporating fit results [Sat Oct 22 05:29:50 2011] Warning, spatial fit 19 centroid is now closest to src. 19 [Sat Oct 22 05:29:50 2011] Vigneting correction estimate = 1.000000 [Sat Oct 22 05:29:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 22 05:29:50 2011] Assessing source extent using major [Sat Oct 22 05:29:50 2011] Source does appear to be extended [Sat Oct 22 05:29:50 2011] Computing asymmetry using major and minor axis, asym = 2.20 [Sat Oct 22 05:29:50 2011] Source is asymmetric [Sat Oct 22 05:29:50 2011] Deleting source due to low Poisson probability 0.9