[Sat Oct 22 05:28:45 2011] Detection parameters:
  Position = (914.2, 411.5) = 13 25 27.48 -43 1 7.2
  Extent = 0.7" x 0.5", rotation angle = 142 degrees
  Source counts = 729.8 +/- 29.0
  Background counts = 109.2
  Rate = 0.1 +/- 0.006

[Sat Oct 22 05:28:48 2011] Off-axis axis estimate = 3.03'
[Sat Oct 22 05:29:36 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:29:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:29:36 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Oct 22 05:29:36 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.048
[Sat Oct 22 05:29:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Sat Oct 22 05:29:37 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:37 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10724_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:29:38 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:29:38 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:29:38 2011] Fit fullrun_ccd2_acisf10724_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:29:50 2011] Spatial fit model total counts = 1192.960000, observed total counts = 1193.000000
[Sat Oct 22 05:29:50 2011] Offset between fit and detection position for source 1 = 0.758241 pixels
[Sat Oct 22 05:29:50 2011] 1065.722000 total counts/ 871.176000 bgd. counts: snr = 6.591274
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.758241 pixels
  Position = (913.9, 412.2) = 13 25 27.52 -43 1 7.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 194.5 +/- 32.6
  Background counts = 871.2
  Rate = 0.04 +/- 0.006
[Sat Oct 22 05:29:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:29:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:29:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:29:50 2011] Source does appear to be extended
[Sat Oct 22 05:29:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:29:50 2011] Source is confused with source 2
[Sat Oct 22 05:30:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:30:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:30:11 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct 22 05:30:11 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.288
[Sat Oct 22 05:30:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.62"
[Sat Oct 22 05:30:12 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:30:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:30:12 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:30:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:30:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10724_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:30:12 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:30:12 2011] fullrun_ccd2_acisf10724_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:30:12 2011] Fit fullrun_ccd2_acisf10724_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:30:20 2011] Spatial fit model total counts = 1166.860000, observed total counts = 1172.000000
[Sat Oct 22 05:30:20 2011] Offset between fit and detection position for source 1 = 2.001983 pixels
[Sat Oct 22 05:30:20 2011] 1119.859000 total counts/ 720.532000 bgd. counts: snr = 14.876544
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.001983 pixels
  Position = (911.9, 411.9) = 13 25 27.61 -43 1 7.3
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 399.3 +/- 33.5
  Background counts = 720.5
  Rate = 0.08 +/- 0.007
[Sat Oct 22 05:30:20 2011] Spatial fit model total counts = 1117.000000, observed total counts = 1113.000000
[Sat Oct 22 05:30:20 2011] Offset between fit and detection position for source 1 = 0.665476 pixels
[Sat Oct 22 05:30:20 2011] Warning, changing simple spatial fit ID from 1 to 2
[Sat Oct 22 05:30:20 2011] 855.987000 total counts/ 488.954000 bgd. counts: snr = 16.598587
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.665476 pixels
  Position = (911.6, 412.5) = 13 25 27.62 -43 1 7.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 367.0 +/- 29.3
  Background counts = 489.0
  Rate = 0.07 +/- 0.006
[Sat Oct 22 05:30:20 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:30:20 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:30:20 2011] Source does appear to be extended
[Sat Oct 22 05:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:31:51 2011] Not overwriting source region fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 05:31:51 2011] Extracting stamp from image fullrun_ccd2_acisf10724_pi14-548_cl_sm2.00.img.gz, (843, 344) - (980, 481)
[Sat Oct 22 05:31:51 2011] Writing fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 05:31:52 2011] ../../acisf10724/products/events/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.evt and ../../acisf10724/products/events/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 05:31:52 2011] Size of ../../acisf10724/products/events/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1524 counts
[Sat Oct 22 05:31:52 2011] Mean chipx,y = (387.94, 857.76)
[Sat Oct 22 05:31:52 2011] Mean tdetx,y = (3918.76, 3698.06)
[Sat Oct 22 05:31:52 2011] chipx,y range = (361.00-419.00, 829.00-885.00)
[Sat Oct 22 05:31:52 2011] Size of ../../acisf10724/products/events/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 590 counts
[Sat Oct 22 05:31:52 2011] ../../acisf10724/products/images/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.img and ../../acisf10724/products/images/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 05:31:52 2011] ../../acisf10724/products/spectra/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.pi and ../../acisf10724/products/spectra/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 05:31:55 2011] ../../acisf10724/products/lightcurves/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.lc and ../../acisf10724/products/lightcurves/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 05:33:03 2011] Keeping rmf generated by specextract
[Sat Oct 22 05:33:03 2011] 190.908
[Sat Oct 22 05:34:25 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:34:25 2011] Error reading totcts from fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 05:34:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:34:25 2011] Using photon index=1.80, rate=0.0719, arf fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 05:34:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:34:25 2011] Updating source flux to 8.4e-13
[Sat Oct 22 05:34:30 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Oct 22 05:34:53 2011] Reading fit data from acisf10724/analysis//spectral/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 22 05:34:53 2011] Spectral fit parameter nH value = 4.38543e+22
[Sat Oct 22 05:34:53 2011] Spectral fit parameter PhoIndex value = -0.163056
[Sat Oct 22 05:34:53 2011] Failed to get F(0.3-8.0) from acisf10724/analysis//spectral/fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 05:34:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:34:53 2011] Using Nh = 4.4e+22, photon index=-0.16, rate=0.0719, arf fullrun_ccd2_acisf10724_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 05:34:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:34:54 2011] Updating source flux to 2.8e-12