[Sat Oct 22 05:28:42 2011] Detection parameters:
  Position = (848.7, 803.4) = 13 25 58.66 -43 4 30.8
  Extent = 0.9" x 0.6", rotation angle = 40 degrees
  Source counts = 76.4 +/- 8.8
  Background counts = 1.6
  Rate = 0.01 +/- 0.002

[Sat Oct 22 05:28:43 2011] Off-axis axis estimate = 5.31'
[Sat Oct 22 05:29:35 2011] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:29:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:29:35 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Sat Oct 22 05:29:35 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Sat Oct 22 05:29:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.31"
[Sat Oct 22 05:29:35 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:29:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:35 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:29:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:29:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10724_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:29:35 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:29:35 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:29:35 2011] Fit fullrun_ccd0_acisf10724_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:29:45 2011] Spatial fit model total counts = 81.818800, observed total counts = 82.000000
[Sat Oct 22 05:29:45 2011] Offset between fit and detection position for source 1 = 0.463525 pixels
[Sat Oct 22 05:29:45 2011] 82.107110 total counts/ 8.970810 bgd. counts: snr = 24.418397
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.463525 pixels
  Position = (849.0, 803.8) = 13 25 58.67 -43 4 30.8
  Extent = 1.4 (1.1-1.6)", rotation angle = 0
  Source counts = 73.1 +/- 9.1
  Background counts = 9.0
  Rate = 0.01 +/- 0.002
[Sat Oct 22 05:29:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:29:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:29:45 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:29:45 2011] Source does appear to be extended
[Sat Oct 22 05:29:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:30:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:30:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:30:10 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Sat Oct 22 05:30:10 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.951
[Sat Oct 22 05:30:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.39"
[Sat Oct 22 05:30:10 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:30:10 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:30:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10724_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:30:10 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:30:10 2011] fullrun_ccd0_acisf10724_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:30:10 2011] Fit fullrun_ccd0_acisf10724_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:30:17 2011] Spatial fit model total counts = 81.888400, observed total counts = 82.000000
[Sat Oct 22 05:30:17 2011] Offset between fit and detection position for source 1 = 0.038232 pixels
[Sat Oct 22 05:30:17 2011] 82.064410 total counts/ 7.692710 bgd. counts: snr = 26.814397
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.038232 pixels
  Position = (849.0, 803.8) = 13 25 58.67 -43 4 30.8
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 74.4 +/- 9.1
  Background counts = 7.7
  Rate = 0.01 +/- 0.002
[Sat Oct 22 05:30:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:30:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:30:17 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:30:17 2011] Source does appear to be extended
[Sat Oct 22 05:30:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:30:37 2011] Not overwriting source region fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 05:30:37 2011] Extracting stamp from image fullrun_ccd0_acisf10724_pi14-548_cl_sm2.00.img.gz, (785, 740) - (913, 868)
[Sat Oct 22 05:30:37 2011] Writing fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 05:30:38 2011] ../../acisf10724/products/events/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.evt and ../../acisf10724/products/events/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 05:30:38 2011] Size of ../../acisf10724/products/events/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Sat Oct 22 05:30:38 2011] Mean chipx,y = (679.76, 569.58)
[Sat Oct 22 05:30:38 2011] Mean tdetx,y = (3630.57, 4452.24)
[Sat Oct 22 05:30:38 2011] chipx,y range = (657.00-702.00, 548.00-591.00)
[Sat Oct 22 05:30:38 2011] Size of ../../acisf10724/products/events/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 13 counts
[Sat Oct 22 05:30:38 2011] ../../acisf10724/products/images/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.img and ../../acisf10724/products/images/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 05:30:38 2011] ../../acisf10724/products/spectra/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.pi and ../../acisf10724/products/spectra/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 05:30:38 2011] Not generating rmf since there are only 74 counts
[Sat Oct 22 05:30:41 2011] ../../acisf10724/products/lightcurves/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.lc and ../../acisf10724/products/lightcurves/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 05:31:03 2011] 185.326
[Sat Oct 22 05:34:25 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:34:25 2011] Error reading totcts from fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 05:34:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:34:25 2011] Using photon index=1.80, rate=0.0146, arf fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 05:34:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:34:25 2011] Updating source flux to 1.8e-13
[Sat Oct 22 05:34:28 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 05:34:29 2011] acisf10724/analysis//spectral/fullrun_ccd0_acisf10724_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete