[Fri Sep 30 00:23:31 2011] Detection parameters:
  Position = (1047.2, 480.2) = 13 25 23.48 -43 1 38.1
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 199.8 +/- 16.4
  Background counts = 70.2
  Rate = 0.004 +/- 0.0003

[Fri Sep 30 00:23:45 2011] Off-axis axis estimate = 0.70'
[Fri Sep 30 00:25:49 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:49 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 00:25:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.913
[Fri Sep 30 00:25:49 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.38"
[Fri Sep 30 00:25:56 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27.ximg exists
[Fri Sep 30 00:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 00:25:56 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Sep 30 00:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 00:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:26:03 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 30 00:26:03 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 30 00:26:03 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep 30 00:26:38 2011] Spatial fit model total counts = 410.217000, observed total counts = 406.000000
[Fri Sep 30 00:26:38 2011] Offset between fit and detection position for source 9 = 0.500275 pixels
[Fri Sep 30 00:26:38 2011] 401.109000 total counts/ 240.312000 bgd. counts: snr = 10.372662
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.500275 pixels
  Position = (1047.4, 480.7) = 13 25 23.49 -43 1 38.1
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 160.8 +/- 20.0
  Background counts = 240.3
  Rate = 0.003 +/- 0.0004
[Fri Sep 30 00:26:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:38 2011] Source does appear to be extended
[Fri Sep 30 00:26:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:10 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Sep 30 00:27:10 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.900
[Fri Sep 30 00:27:10 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.53"
[Fri Sep 30 00:27:12 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27.ximg exists
[Fri Sep 30 00:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27.csv
[Fri Sep 30 00:27:12 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Sep 30 00:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27.csv
[Fri Sep 30 00:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:15 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Sep 30 00:27:15 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Sep 30 00:27:15 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Sep 30 00:27:43 2011] Spatial fit model total counts = 405.865000, observed total counts = 406.000000
[Fri Sep 30 00:27:43 2011] Offset between fit and detection position for source 9 = 0.016562 pixels
[Fri Sep 30 00:27:43 2011] 396.707000 total counts/ 237.961000 bgd. counts: snr = 10.290818
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.016562 pixels
  Position = (1047.4, 480.7) = 13 25 23.49 -43 1 38.1
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 158.7 +/- 19.9
  Background counts = 238.0
  Rate = 0.003 +/- 0.0004
[Fri Sep 30 00:27:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:44 2011] Source does appear to be extended
[Fri Sep 30 00:27:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:30:48 2011] Not overwriting source region fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.reg
[Fri Sep 30 00:30:48 2011] Extracting stamp from image fullrun_ccd7_acisf10722_pi14-548_cl_sm2.00.img.gz, (1024, 457) - (1071, 505)
[Fri Sep 30 00:30:48 2011] Writing fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9.gif
[Fri Sep 30 00:32:43 2011] ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.evt and ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Sep 30 00:32:43 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.evt.gz[events] = 218 counts
[Fri Sep 30 00:32:43 2011] Mean chipx,y = (107.18, 529.89)
[Fri Sep 30 00:32:43 2011] Mean tdetx,y = (4024.18, 2231.89)
[Fri Sep 30 00:32:43 2011] chipx,y range = (88.00-126.00, 510.00-550.00)
[Fri Sep 30 00:32:43 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 390 counts
[Fri Sep 30 00:32:43 2011] ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.img and ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Sep 30 00:32:43 2011] ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.pi and ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Sep 30 00:32:48 2011] ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Sep 30 00:42:46 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:42:46 2011] 231.719
[Fri Sep 30 00:42:59 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:59 2011] Error reading totcts from fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Sep 30 00:43:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:43:02 2011] Using photon index=1.80, rate=0.00321, arf fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src9.arf
[Fri Sep 30 00:43:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:43:02 2011] Updating source flux to 2.4e-14