[Fri Sep 30 00:23:34 2011] Detection parameters:
  Position = (881.4, 456.7) = 13 25 30.92 -43 1 49.7
  Extent = 0.6" x 0.5", rotation angle = 41 degrees
  Source counts = 91.3 +/- 11.7
  Background counts = 45.7
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 00:23:45 2011] Off-axis axis estimate = 0.80'
[Fri Sep 30 00:25:49 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:49 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 00:25:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.381
[Fri Sep 30 00:25:49 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 0.38"
[Fri Sep 30 00:25:59 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71.ximg exists
[Fri Sep 30 00:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71.csv
[Fri Sep 30 00:25:59 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71_1.ximg exists
[Fri Sep 30 00:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71.csv
[Fri Sep 30 00:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:26:04 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Fri Sep 30 00:26:04 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Fri Sep 30 00:26:04 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Fri Sep 30 00:26:38 2011] Spatial fit model total counts = 287.983000, observed total counts = 288.000000
[Fri Sep 30 00:26:38 2011] Offset between fit and detection position for source 72 = 1.635868 pixels
[Fri Sep 30 00:26:38 2011] 291.391600 total counts/ 251.625000 bgd. counts: snr = 2.506926
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 1.635868 pixels
  Position = (882.3, 458.0) = 13 25 30.90 -43 1 49.3
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 39.8 +/- 17.1
  Background counts = 251.6
  Rate = 0.0008 +/- 0.0003
[Fri Sep 30 00:26:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:38 2011] Source does appear to be extended
[Fri Sep 30 00:26:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:10 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Sep 30 00:27:10 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.974
[Fri Sep 30 00:27:10 2011] Giving source the simple spatial ID 68 for pass 1, mean size = 0.50"
[Fri Sep 30 00:27:13 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68.ximg exists
[Fri Sep 30 00:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68.csv
[Fri Sep 30 00:27:13 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68_1.ximg exists
[Fri Sep 30 00:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68.csv
[Fri Sep 30 00:27:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:16 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src68.ximg exists
[Fri Sep 30 00:27:16 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src68_1.ximg exists
[Fri Sep 30 00:27:16 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src68 appears to have run properly
[Fri Sep 30 00:27:44 2011] Spatial fit model total counts = 282.964000, observed total counts = 283.000000
[Fri Sep 30 00:27:44 2011] Offset between fit and detection position for source 72 = 0.054526 pixels
[Fri Sep 30 00:27:44 2011] 289.287600 total counts/ 246.348000 bgd. counts: snr = 2.735795
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.054526 pixels
  Position = (882.3, 458.0) = 13 25 30.90 -43 1 49.3
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 42.9 +/- 17.0
  Background counts = 246.3
  Rate = 0.0009 +/- 0.0003
[Fri Sep 30 00:27:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:44 2011] Source does appear to be extended
[Fri Sep 30 00:27:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:30:49 2011] Not overwriting source region fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.reg
[Fri Sep 30 00:30:49 2011] Extracting stamp from image fullrun_ccd7_acisf10722_pi14-548_cl_sm2.00.img.gz, (858, 433) - (907, 483)
[Fri Sep 30 00:30:49 2011] Writing fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72.gif
[Fri Sep 30 00:35:46 2011] ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.evt and ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Fri Sep 30 00:35:46 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.evt.gz[events] = 109 counts
[Fri Sep 30 00:35:46 2011] Mean chipx,y = (213.49, 402.35)
[Fri Sep 30 00:35:46 2011] Mean tdetx,y = (4130.49, 2104.35)
[Fri Sep 30 00:35:46 2011] chipx,y range = (197.00-233.00, 383.00-422.00)
[Fri Sep 30 00:35:46 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 188 counts
[Fri Sep 30 00:35:46 2011] ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.img and ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Fri Sep 30 00:35:46 2011] ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.pi and ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Fri Sep 30 00:35:46 2011] Not generating rmf since there are only 42 counts
[Fri Sep 30 00:35:49 2011] ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Fri Sep 30 00:42:48 2011] 234.405
[Fri Sep 30 00:43:00 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:43:00 2011] Error reading totcts from fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72_src.pi.gz
[Fri Sep 30 00:43:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:43:02 2011] Using photon index=1.80, rate=0.000869, arf fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src72.arf
[Fri Sep 30 00:43:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:43:02 2011] Updating source flux to 6.6e-15
[Fri Sep 30 00:43:49 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting