[Fri Sep 30 00:23:36 2011] Detection parameters:
  Position = (1006.3, 597.3) = 13 25 25.31 -43 0 40.5
  Extent = 1.0" x 0.5", rotation angle = 52 degrees
  Source counts = 78.7 +/- 11.7
  Background counts = 57.3
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 00:23:45 2011] Off-axis axis estimate = 0.82'
[Fri Sep 30 00:25:49 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:49 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 00:25:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.383
[Fri Sep 30 00:25:49 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 0.38"
[Fri Sep 30 00:25:59 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87.ximg exists
[Fri Sep 30 00:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87.csv
[Fri Sep 30 00:25:59 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87_1.ximg exists
[Fri Sep 30 00:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87.csv
[Fri Sep 30 00:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:26:04 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Fri Sep 30 00:26:04 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Fri Sep 30 00:26:04 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Fri Sep 30 00:26:38 2011] Spatial fit model total counts = 343.994000, observed total counts = 344.000000
[Fri Sep 30 00:26:38 2011] Offset between fit and detection position for source 102 = 1.308242 pixels
[Fri Sep 30 00:26:38 2011] 339.369100 total counts/ 288.257000 bgd. counts: snr = 3.010466
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.308242 pixels
  Position = (1007.2, 598.2) = 13 25 25.30 -43 0 40.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 51.1 +/- 18.4
  Background counts = 288.3
  Rate = 0.001 +/- 0.0004
[Fri Sep 30 00:26:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:38 2011] Source does appear to be extended
[Fri Sep 30 00:26:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:10 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Sep 30 00:27:10 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994
[Fri Sep 30 00:27:10 2011] Giving source the simple spatial ID 84 for pass 1, mean size = 0.49"
[Fri Sep 30 00:27:13 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84.ximg exists
[Fri Sep 30 00:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84.csv
[Fri Sep 30 00:27:13 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84_1.ximg exists
[Fri Sep 30 00:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84.csv
[Fri Sep 30 00:27:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:16 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src84.ximg exists
[Fri Sep 30 00:27:16 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src84_1.ximg exists
[Fri Sep 30 00:27:16 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src84 appears to have run properly
[Fri Sep 30 00:27:44 2011] Spatial fit model total counts = 348.482000, observed total counts = 349.000000
[Fri Sep 30 00:27:44 2011] Offset between fit and detection position for source 102 = 0.055944 pixels
[Fri Sep 30 00:27:44 2011] 347.352900 total counts/ 297.346000 bgd. counts: snr = 2.900006
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 0.055944 pixels
  Position = (1007.2, 598.2) = 13 25 25.30 -43 0 40.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 50.0 +/- 18.6
  Background counts = 297.3
  Rate = 0.001 +/- 0.0004
[Fri Sep 30 00:27:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:44 2011] Source does appear to be extended
[Fri Sep 30 00:27:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:30:50 2011] Not overwriting source region fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.reg
[Fri Sep 30 00:30:50 2011] Extracting stamp from image fullrun_ccd7_acisf10722_pi14-548_cl_sm2.00.img.gz, (984, 575) - (1030, 621)
[Fri Sep 30 00:30:50 2011] Writing fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102.gif
[Fri Sep 30 00:36:52 2011] ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.evt and ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_bgd.evt exist, delete to re-create
[Fri Sep 30 00:36:53 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.evt.gz[events] = 114 counts
[Fri Sep 30 00:36:53 2011] Mean chipx,y = (214.40, 591.95)
[Fri Sep 30 00:36:53 2011] Mean tdetx,y = (4131.40, 2293.95)
[Fri Sep 30 00:36:53 2011] chipx,y range = (197.00-235.00, 570.00-613.00)
[Fri Sep 30 00:36:53 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_bgd.evt.gz[events] = 360 counts
[Fri Sep 30 00:36:53 2011] ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.img and ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_bgd.img exist, delete to re-create
[Fri Sep 30 00:36:53 2011] ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.pi and ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_bgd.pi exist, delete to re-create
[Fri Sep 30 00:36:53 2011] Not generating rmf since there are only 50 counts
[Fri Sep 30 00:36:57 2011] ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_bgd.lc exist, delete to re-create
[Fri Sep 30 00:42:48 2011] 235.083
[Fri Sep 30 00:43:00 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:43:00 2011] Error reading totcts from fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102_src.pi.gz
[Fri Sep 30 00:43:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:43:02 2011] Using photon index=1.80, rate=0.00101, arf fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src102.arf
[Fri Sep 30 00:43:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:43:02 2011] Updating source flux to 7.6e-15
[Fri Sep 30 00:43:49 2011] Source 102 has fewer than 100.000000 counts, skipping spectral fitting