[Fri Sep 30 00:23:31 2011] Detection parameters:
  Position = (847.8, 488.8) = 13 25 32.42 -43 1 33.9
  Extent = 0.5" x 0.5", rotation angle = 30 degrees
  Source counts = 192.8 +/- 15.4
  Background counts = 44.2
  Rate = 0.004 +/- 0.0003

[Fri Sep 30 00:23:45 2011] Off-axis axis estimate = 0.98'
[Fri Sep 30 00:25:49 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:49 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 00:25:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.618
[Fri Sep 30 00:25:49 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38"
[Fri Sep 30 00:25:56 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28.ximg exists
[Fri Sep 30 00:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28.csv
[Fri Sep 30 00:25:56 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Sep 30 00:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28.csv
[Fri Sep 30 00:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:26:03 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Sep 30 00:26:03 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Sep 30 00:26:03 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Sep 30 00:26:38 2011] Spatial fit model total counts = 285.103000, observed total counts = 287.000000
[Fri Sep 30 00:26:38 2011] Offset between fit and detection position for source 10 = 0.734240 pixels
[Fri Sep 30 00:26:38 2011] 285.065000 total counts/ 112.401000 bgd. counts: snr = 16.286085
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.734240 pixels
  Position = (848.4, 489.2) = 13 25 32.42 -43 1 33.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 172.7 +/- 16.9
  Background counts = 112.4
  Rate = 0.003 +/- 0.0003
[Fri Sep 30 00:26:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:38 2011] Source does appear to be extended
[Fri Sep 30 00:26:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:10 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 00:27:10 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.132
[Fri Sep 30 00:27:10 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.45"
[Fri Sep 30 00:27:12 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28.ximg exists
[Fri Sep 30 00:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28.csv
[Fri Sep 30 00:27:12 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Sep 30 00:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28.csv
[Fri Sep 30 00:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10722_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:15 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Sep 30 00:27:15 2011] fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Sep 30 00:27:15 2011] Fit fullrun_ccd7_acisf10722_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Sep 30 00:27:43 2011] Spatial fit model total counts = 285.326000, observed total counts = 287.000000
[Fri Sep 30 00:27:43 2011] Offset between fit and detection position for source 10 = 0.000142 pixels
[Fri Sep 30 00:27:43 2011] 285.292000 total counts/ 112.443000 bgd. counts: snr = 16.300490
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000142 pixels
  Position = (848.4, 489.2) = 13 25 32.42 -43 1 33.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 172.8 +/- 16.9
  Background counts = 112.4
  Rate = 0.003 +/- 0.0003
[Fri Sep 30 00:27:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:44 2011] Source does appear to be extended
[Fri Sep 30 00:27:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:30:48 2011] Not overwriting source region fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 30 00:30:48 2011] Extracting stamp from image fullrun_ccd7_acisf10722_pi14-548_cl_sm2.00.img.gz, (828, 469) - (869, 510)
[Fri Sep 30 00:30:48 2011] Writing fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10.gif
[Fri Sep 30 00:32:48 2011] ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.evt and ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 30 00:32:48 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.evt.gz[events] = 195 counts
[Fri Sep 30 00:32:48 2011] Mean chipx,y = (261.69, 402.69)
[Fri Sep 30 00:32:48 2011] Mean tdetx,y = (4178.69, 2104.69)
[Fri Sep 30 00:32:48 2011] chipx,y range = (244.00-281.00, 384.00-423.00)
[Fri Sep 30 00:32:48 2011] Size of ../../acisf10722/products/events/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 168 counts
[Fri Sep 30 00:32:48 2011] ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.img and ../../acisf10722/products/images/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 30 00:32:48 2011] ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.pi and ../../acisf10722/products/spectra/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep 30 00:32:54 2011] ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 30 00:42:46 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:42:46 2011] 224.23
[Fri Sep 30 00:42:59 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:59 2011] Error reading totcts from fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 30 00:43:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:43:02 2011] Using photon index=1.80, rate=0.0035, arf fullrun_ccd7_acisf10722_pi14-548_pass1_cl_src10.arf
[Fri Sep 30 00:43:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:43:02 2011] Updating source flux to 2.8e-14