[Fri Sep 30 00:23:25 2011] Detection parameters:
  Position = (247.3, 931.2) = 13 25 23.61 -43 3 25.9
  Extent = 0.6" x 0.5", rotation angle = 78 degrees
  Source counts = 37.1 +/- 6.5
  Background counts = 4.9
  Rate = 0.0008 +/- 0.0001

[Fri Sep 30 00:23:27 2011] Off-axis axis estimate = 2.11'
[Fri Sep 30 00:25:44 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:44 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 00:25:44 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.153
[Fri Sep 30 00:25:44 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.44"
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:46 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Sep 30 00:25:46 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Sep 30 00:25:46 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Sep 30 00:26:25 2011] Spatial fit model total counts = 47.545300, observed total counts = 48.000000
[Fri Sep 30 00:26:25 2011] Offset between fit and detection position for source 9 = 0.947380 pixels
[Fri Sep 30 00:26:25 2011] 47.158520 total counts/ 9.846920 bgd. counts: snr = 11.890323
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.947380 pixels
  Position = (247.9, 931.9) = 13 25 23.60 -43 3 25.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 37.3 +/- 6.9
  Background counts = 9.8
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 00:26:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:25 2011] Source does appear to be extended
[Fri Sep 30 00:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:08 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Sep 30 00:27:08 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.425
[Fri Sep 30 00:27:08 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.58"
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21.csv
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21_1.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21.csv
[Fri Sep 30 00:27:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Sep 30 00:27:09 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Sep 30 00:27:30 2011] Spatial fit model total counts = 46.468500, observed total counts = 47.000000
[Fri Sep 30 00:27:30 2011] Offset between fit and detection position for source 9 = 0.008938 pixels
[Fri Sep 30 00:27:30 2011] 45.969230 total counts/ 8.457730 bgd. counts: snr = 12.898450
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.008938 pixels
  Position = (247.9, 931.9) = 13 25 23.60 -43 3 25.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 37.5 +/- 6.8
  Background counts = 8.5
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 00:27:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:30 2011] Source does appear to be extended
[Fri Sep 30 00:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:28:24 2011] Not overwriting source region fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.reg
[Fri Sep 30 00:28:24 2011] Extracting stamp from image fullrun_ccd6_acisf10722_pi14-548_cl_sm2.00.img.gz, (221, 905) - (275, 959)
[Fri Sep 30 00:28:24 2011] Writing fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9.gif
[Fri Sep 30 00:29:35 2011] ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.evt and ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Sep 30 00:29:35 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.evt.gz[events] = 40 counts
[Fri Sep 30 00:29:35 2011] Mean chipx,y = (1007.27, 363.15)
[Fri Sep 30 00:29:35 2011] Mean tdetx,y = (3882.28, 2065.15)
[Fri Sep 30 00:29:35 2011] chipx,y range = (992.00-1023.00, 346.00-383.00)
[Fri Sep 30 00:29:36 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 34 counts
[Fri Sep 30 00:29:36 2011] ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.img and ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Sep 30 00:29:36 2011] ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.pi and ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Sep 30 00:29:36 2011] Not generating rmf since there are only 37 counts
[Fri Sep 30 00:29:40 2011] ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Sep 30 00:30:47 2011] 182.773
[Fri Sep 30 00:42:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:58 2011] Error reading totcts from fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Sep 30 00:42:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:42:58 2011] Using photon index=1.80, rate=0.000759, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src9.arf
[Fri Sep 30 00:42:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:42:58 2011] Updating source flux to 9e-15
[Fri Sep 30 00:43:17 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting