[Fri Sep 30 00:23:25 2011] Detection parameters:
  Position = (605.5, 843.5) = 13 25 7.52 -43 4 8.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 1754.8 +/- 42.6
  Background counts = 61.2
  Rate = 0.04 +/- 0.0009

[Fri Sep 30 00:23:27 2011] Off-axis axis estimate = 4.50'
[Fri Sep 30 00:25:44 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:25:44 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Sep 30 00:25:44 2011] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.829
[Fri Sep 30 00:25:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.99"
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:26:25 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.702176 pixels away
[Fri Sep 30 00:26:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:25 2011] Assessing source extent using major
[Fri Sep 30 00:26:25 2011] Source does appear to be extended
[Fri Sep 30 00:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:08 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:27:08 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Sep 30 00:27:08 2011] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.829
[Fri Sep 30 00:27:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.99"
[Fri Sep 30 00:27:08 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 00:27:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:27:08 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 00:27:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:27:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:27:09 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:27:30 2011] Spatial fit model total counts = 1527.900000, observed total counts = 1504.000000
[Fri Sep 30 00:27:30 2011] Offset between fit and detection position for source 6 = 3.277613 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.277613 pixels
  Position = (608.7, 844.1) = 13 25 7.40 -43 4 8.8
  Extent = 1.4 (1.4-1.5)", rotation angle = 0
  Source counts = 1524.0 +/- 39.0
  Background counts = 0.0
  Rate = 0.03 +/- 0.0008
[Fri Sep 30 00:27:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:30 2011] Source does appear to be extended
[Fri Sep 30 00:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:28:23 2011] Not overwriting source region fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 00:28:23 2011] Extracting stamp from image fullrun_ccd6_acisf10722_pi14-548_cl_sm2.00.img.gz, (543, 779) - (674, 909)
[Fri Sep 30 00:28:23 2011] Writing fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 00:28:25 2011] ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.evt and ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 00:28:25 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.evt.gz[events] = 1942 counts
[Fri Sep 30 00:28:25 2011] Mean chipx,y = (678.83, 539.04)
[Fri Sep 30 00:28:25 2011] Mean tdetx,y = (3553.83, 2241.04)
[Fri Sep 30 00:28:25 2011] chipx,y range = (657.00-706.00, 514.00-564.00)
[Fri Sep 30 00:28:25 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 286 counts
[Fri Sep 30 00:28:25 2011] ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.img and ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 00:28:25 2011] ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.pi and ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 00:28:28 2011] ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 00:30:45 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:30:45 2011] 191.495
[Fri Sep 30 00:42:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:58 2011] Error reading totcts from fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 00:42:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:42:58 2011] Using photon index=1.80, rate=0.0308, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 00:42:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:42:58 2011] Updating source flux to 3.4e-13
[Fri Sep 30 00:43:48 2011] Reading fit data from acisf10722/analysis//spectral/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_pl.csv
[Fri Sep 30 00:43:48 2011] Spectral fit parameter nH value = 2.53381e+21
[Fri Sep 30 00:43:48 2011] Spectral fit parameter PhoIndex value = 3.78413
[Fri Sep 30 00:43:48 2011] Failed to get F(0.3-8.0) from acisf10722/analysis//spectral/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 00:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:43:48 2011] Using Nh = 2.5e+21, photon index=3.78, rate=0.0308, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 00:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:43:49 2011] Updating source flux to 2.4e-13