[Fri Sep 30 00:23:26 2011] Detection parameters:
  Position = (159.2, 638.7) = 13 25 27.56 -43 5 49.8
  Extent = 0.5" x 0.5", rotation angle = 174 degrees
  Source counts = 21.1 +/- 4.9
  Background counts = 2.9
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 00:23:27 2011] Off-axis axis estimate = 4.41'
[Fri Sep 30 00:25:44 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:44 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Fri Sep 30 00:25:44 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Fri Sep 30 00:25:44 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.96"
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:46 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 30 00:25:47 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 30 00:25:47 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep 30 00:26:25 2011] Spatial fit model total counts = 25.146700, observed total counts = 26.000000
[Fri Sep 30 00:26:25 2011] Offset between fit and detection position for source 21 = 1.801871 pixels
[Fri Sep 30 00:26:25 2011] 24.528030 total counts/ 0.231530 bgd. counts: snr = 50.494035
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.801871 pixels
  Position = (161.0, 638.5) = 13 25 27.50 -43 5 50.1
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 24.3 +/- 5.0
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 00:26:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:25 2011] Source does appear to be extended
[Fri Sep 30 00:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:08 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Fri Sep 30 00:27:08 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Fri Sep 30 00:27:08 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 1.16"
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27.csv
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27.csv
[Fri Sep 30 00:27:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:10 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Sep 30 00:27:10 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Sep 30 00:27:10 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Sep 30 00:27:30 2011] Spatial fit model total counts = 26.999700, observed total counts = 27.000000
[Fri Sep 30 00:27:30 2011] Offset between fit and detection position for source 21 = 0.318042 pixels
[Fri Sep 30 00:27:30 2011] 26.905580 total counts/ 6.087080 bgd. counts: snr = 8.438105
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.318042 pixels
  Position = (160.7, 638.4) = 13 25 27.52 -43 5 50.2
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 20.8 +/- 5.2
  Background counts = 6.1
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 00:27:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:30 2011] Source does appear to be extended
[Fri Sep 30 00:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:28:24 2011] Not overwriting source region fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.reg
[Fri Sep 30 00:28:24 2011] Extracting stamp from image fullrun_ccd6_acisf10722_pi14-548_cl_sm2.00.img.gz, (111, 589) - (210, 688)
[Fri Sep 30 00:28:24 2011] Writing fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21.gif
[Fri Sep 30 00:30:01 2011] ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.evt and ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri Sep 30 00:30:01 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.evt.gz[events] = 26 counts
[Fri Sep 30 00:30:01 2011] Mean chipx,y = (877.77, 86.69)
[Fri Sep 30 00:30:01 2011] Mean tdetx,y = (3752.77, 1788.69)
[Fri Sep 30 00:30:01 2011] chipx,y range = (860.00-895.00, 64.00-104.00)
[Fri Sep 30 00:30:01 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 66 counts
[Fri Sep 30 00:30:01 2011] ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.img and ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri Sep 30 00:30:01 2011] ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.pi and ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri Sep 30 00:30:01 2011] Not generating rmf since there are only 20 counts
[Fri Sep 30 00:30:06 2011] ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri Sep 30 00:30:47 2011] 193.823
[Fri Sep 30 00:42:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:58 2011] Error reading totcts from fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21_src.pi.gz
[Fri Sep 30 00:42:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:42:58 2011] Using photon index=1.80, rate=0.000421, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src21.arf
[Fri Sep 30 00:42:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:42:58 2011] Updating source flux to 4.9e-15
[Fri Sep 30 00:43:17 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting