[Fri Sep 30 00:23:25 2011] Detection parameters:
  Position = (408.7, 994.1) = 13 25 16.36 -43 2 54.9
  Extent = 0.5" x 0.5", rotation angle = 165 degrees
  Source counts = 121.5 +/- 11.5
  Background counts = 10.5
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 00:23:27 2011] Off-axis axis estimate = 2.47'
[Fri Sep 30 00:25:44 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:44 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Sep 30 00:25:44 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Fri Sep 30 00:25:44 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.49"
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:46 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 30 00:25:46 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 30 00:25:46 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 30 00:26:25 2011] Spatial fit model total counts = 146.000000, observed total counts = 146.000000
[Fri Sep 30 00:26:25 2011] Offset between fit and detection position for source 12 = 0.743684 pixels
[Fri Sep 30 00:26:25 2011] 145.719200 total counts/ 34.320200 bgd. counts: snr = 19.015440
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.743684 pixels
  Position = (409.2, 994.5) = 13 25 16.36 -43 2 54.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 111.4 +/- 12.1
  Background counts = 34.3
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 00:26:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:26:25 2011] Source does appear to be extended
[Fri Sep 30 00:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:27:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:08 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Fri Sep 30 00:27:08 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.887
[Fri Sep 30 00:27:08 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.66"
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 30 00:27:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 00:27:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 30 00:27:09 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 30 00:27:30 2011] Spatial fit model total counts = 145.000000, observed total counts = 145.000000
[Fri Sep 30 00:27:30 2011] Offset between fit and detection position for source 12 = 0.009662 pixels
[Fri Sep 30 00:27:30 2011] 144.077800 total counts/ 32.065800 bgd. counts: snr = 19.780785
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.009662 pixels
  Position = (409.3, 994.5) = 13 25 16.36 -43 2 54.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 112.0 +/- 12.0
  Background counts = 32.1
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 00:27:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:30 2011] Source does appear to be extended
[Fri Sep 30 00:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:28:23 2011] Not overwriting source region fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.reg
[Fri Sep 30 00:28:23 2011] Extracting stamp from image fullrun_ccd6_acisf10722_pi14-548_cl_sm2.00.img.gz, (379, 964) - (439, 1025)
[Fri Sep 30 00:28:23 2011] Writing fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12.gif
[Fri Sep 30 00:28:56 2011] ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.evt and ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Sep 30 00:28:56 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.evt.gz[events] = 126 counts
[Fri Sep 30 00:28:56 2011] Mean chipx,y = (928.09, 520.55)
[Fri Sep 30 00:28:56 2011] Mean tdetx,y = (3803.09, 2222.55)
[Fri Sep 30 00:28:56 2011] chipx,y range = (912.00-948.00, 499.00-539.00)
[Fri Sep 30 00:28:56 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 82 counts
[Fri Sep 30 00:28:56 2011] ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.img and ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Sep 30 00:28:56 2011] ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.pi and ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Sep 30 00:28:59 2011] ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Sep 30 00:30:46 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:30:46 2011] 206.651
[Fri Sep 30 00:42:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:58 2011] Error reading totcts from fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Sep 30 00:42:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:42:58 2011] Using photon index=1.80, rate=0.00227, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src12.arf
[Fri Sep 30 00:42:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:42:58 2011] Updating source flux to 2.4e-14