[Fri Sep 30 00:23:25 2011] Detection parameters:
  Position = (713.4, 1018.1) = 13 25 2.69 -43 2 43.0
  Extent = 1.0" x 0.8", rotation angle = 11 degrees
  Source counts = 522.8 +/- 23.2
  Background counts = 16.2
  Rate = 0.01 +/- 0.0005

[Fri Sep 30 00:23:27 2011] Off-axis axis estimate = 4.65'
[Fri Sep 30 00:25:44 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:25:44 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Sep 30 00:25:44 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Fri Sep 30 00:25:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.05"
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 00:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 00:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 00:25:45 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 00:25:45 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 00:26:25 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.074190 pixels away
[Fri Sep 30 00:26:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:26:25 2011] Assessing source extent using major
[Fri Sep 30 00:26:25 2011] Source does appear to be extended
[Fri Sep 30 00:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.29
[Fri Sep 30 00:27:08 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:27:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 00:27:08 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Sep 30 00:27:08 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Fri Sep 30 00:27:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.05"
[Fri Sep 30 00:27:08 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 00:27:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 00:27:08 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 00:27:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 00:27:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10722_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 00:27:09 2011] fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 00:27:09 2011] Fit fullrun_ccd6_acisf10722_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 00:27:30 2011] Spatial fit model total counts = 513.642000, observed total counts = 514.000000
[Fri Sep 30 00:27:30 2011] Offset between fit and detection position for source 1 = 0.766726 pixels
[Fri Sep 30 00:27:30 2011] 513.526360 total counts/ 3.246360 bgd. counts: snr = 283.211059
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.766726 pixels
  Position = (714.0, 1018.6) = 13 25 2.68 -43 2 43.0
  Extent = 1.4 (1.2-1.4)", rotation angle = 0
  Source counts = 510.3 +/- 22.7
  Background counts = 3.2
  Rate = 0.01 +/- 0.0005
[Fri Sep 30 00:27:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:27:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:27:30 2011] Source does appear to be extended
[Fri Sep 30 00:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:28:23 2011] Not overwriting source region fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 00:28:23 2011] Extracting stamp from image fullrun_ccd6_acisf10722_pi14-548_cl_sm2.00.img.gz, (652, 956) - (776, 1081)
[Fri Sep 30 00:28:23 2011] Writing fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 00:28:33 2011] ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.evt and ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 00:28:33 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.evt.gz[events] = 537 counts
[Fri Sep 30 00:28:33 2011] Mean chipx,y = (717.60, 739.72)
[Fri Sep 30 00:28:33 2011] Mean tdetx,y = (3592.60, 2441.72)
[Fri Sep 30 00:28:33 2011] chipx,y range = (694.00-738.00, 717.00-764.00)
[Fri Sep 30 00:28:33 2011] Size of ../../acisf10722/products/events/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 120 counts
[Fri Sep 30 00:28:33 2011] ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.img and ../../acisf10722/products/images/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 00:28:33 2011] ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.pi and ../../acisf10722/products/spectra/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 00:28:36 2011] ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.lc and ../../acisf10722/products/lightcurves/fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 00:30:46 2011] Keeping rmf generated by specextract
[Fri Sep 30 00:30:46 2011] 191.001
[Fri Sep 30 00:42:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:42:58 2011] Error reading totcts from fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 00:42:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:42:58 2011] Using photon index=1.80, rate=0.0103, arf fullrun_ccd6_acisf10722_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 00:42:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:42:58 2011] Updating source flux to 1.2e-13