[Wed Oct  5 12:13:50 2011] Detection parameters:
  Position = (304.6, 889.8) = 9 27 5.87 29 41 19.9
  Extent = 0.6" x 0.5", rotation angle = 165 degrees
  Source counts = 157.4 +/- 12.6
  Background counts = 1.6
  Rate = 0.006 +/- 0.0005

[Wed Oct  5 12:13:51 2011] Off-axis axis estimate = 2.53'
[Wed Oct  5 12:15:02 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:15:02 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Oct  5 12:15:02 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.987
[Wed Oct  5 12:15:02 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.50"
[Wed Oct  5 12:15:03 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 12:15:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 12:15:03 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 12:15:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 12:15:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10721_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 12:15:06 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 12:15:06 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 12:15:06 2011] Fit fullrun_ccd6_acisf10721_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 12:15:14 2011] Spatial fit model total counts = 161.000000, observed total counts = 161.000000
[Wed Oct  5 12:15:14 2011] Offset between fit and detection position for source 3 = 0.721259 pixels
[Wed Oct  5 12:15:14 2011] 160.782340 total counts/ 4.072340 bgd. counts: snr = 77.655943
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.721259 pixels
  Position = (305.2, 890.3) = 9 27 5.87 29 41 19.9
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 156.7 +/- 12.7
  Background counts = 4.1
  Rate = 0.006 +/- 0.0005
[Wed Oct  5 12:15:14 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 12:15:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 12:15:14 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 12:15:14 2011] Source does appear to be extended
[Wed Oct  5 12:15:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 12:15:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:15:37 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Oct  5 12:15:37 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.136
[Wed Oct  5 12:15:37 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.68"
[Wed Oct  5 12:15:38 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 12:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 12:15:38 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 12:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 12:15:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10721_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 12:15:38 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 12:15:38 2011] fullrun_ccd6_acisf10721_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 12:15:38 2011] Fit fullrun_ccd6_acisf10721_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 12:15:47 2011] Spatial fit model total counts = 160.474000, observed total counts = 161.000000
[Wed Oct  5 12:15:47 2011] Offset between fit and detection position for source 3 = 0.006681 pixels
[Wed Oct  5 12:15:47 2011] 160.748270 total counts/ 4.742270 bgd. counts: snr = 71.638777
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006681 pixels
  Position = (305.2, 890.3) = 9 27 5.87 29 41 19.9
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 156.0 +/- 12.7
  Background counts = 4.7
  Rate = 0.006 +/- 0.0005
[Wed Oct  5 12:15:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 12:15:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 12:15:47 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 12:15:47 2011] Source does appear to be extended
[Wed Oct  5 12:15:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 12:17:34 2011] Not overwriting source region fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.reg
[Wed Oct  5 12:17:34 2011] Extracting stamp from image fullrun_ccd6_acisf10721_pi14-548_cl_sm2.00.img.gz, (274, 859) - (336, 921)
[Wed Oct  5 12:17:34 2011] Writing fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3.gif
[Wed Oct  5 12:17:44 2011] ../../acisf10721/products/events/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.evt and ../../acisf10721/products/events/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct  5 12:17:44 2011] Size of ../../acisf10721/products/events/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.evt.gz[events] = 158 counts
[Wed Oct  5 12:17:44 2011] Mean chipx,y = (944.00, 400.18)
[Wed Oct  5 12:17:44 2011] Mean tdetx,y = (3819.00, 2102.18)
[Wed Oct  5 12:17:44 2011] chipx,y range = (926.00-964.00, 380.00-419.00)
[Wed Oct  5 12:17:44 2011] Size of ../../acisf10721/products/events/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Wed Oct  5 12:17:44 2011] ../../acisf10721/products/images/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.img and ../../acisf10721/products/images/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct  5 12:17:44 2011] ../../acisf10721/products/spectra/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.pi and ../../acisf10721/products/spectra/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct  5 12:17:51 2011] ../../acisf10721/products/lightcurves/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.lc and ../../acisf10721/products/lightcurves/fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct  5 12:19:06 2011] Keeping rmf generated by specextract
[Wed Oct  5 12:19:06 2011] 206.671
[Wed Oct  5 12:20:58 2011] Updating aperture counts using extracted products
[Wed Oct  5 12:20:58 2011] Error reading totcts from fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct  5 12:20:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 12:20:58 2011] Using photon index=1.80, rate=0.00585, arf fullrun_ccd6_acisf10721_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 12:20:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 12:20:58 2011] Updating source flux to 6.3e-14