[Fri Aug 31 00:40:46 2012] Detection parameters:
  Position = (239.9, 274.7) = 3 9 40.63 -20 34 56.8
  Extent = 0.5" x 0.5", rotation angle = 123 degrees
  Source counts = 101.0 +/- 10.1
  Background counts = 2.0
  Rate = 0.002 +/- 0.0002

[Fri Aug 31 00:40:48 2012] Off-axis axis estimate = 1.77'
[Fri Aug 31 00:41:54 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:41:54 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Aug 31 00:41:54 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.845
[Fri Aug 31 00:41:54 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.41"
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5.csv
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5.csv
[Fri Aug 31 00:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 31 00:41:57 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 31 00:42:13 2012] Spatial fit model total counts = 106.868000, observed total counts = 107.000000
[Fri Aug 31 00:42:13 2012] Offset between fit and detection position for source 3 = 0.660507 pixels
[Fri Aug 31 00:42:13 2012] 107.951000 total counts/ 15.133300 bgd. counts: snr = 23.859645
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.660507 pixels
  Position = (240.4, 275.2) = 3 9 40.63 -20 34 56.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 92.8 +/- 10.4
  Background counts = 15.1
  Rate = 0.002 +/- 0.0002
[Fri Aug 31 00:42:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:13 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:13 2012] Source does appear to be extended
[Fri Aug 31 00:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:42:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:42:40 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Aug 31 00:42:40 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.205
[Fri Aug 31 00:42:40 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.43"
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5.csv
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5.csv
[Fri Aug 31 00:42:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 31 00:42:41 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 31 00:42:57 2012] Spatial fit model total counts = 106.919000, observed total counts = 107.000000
[Fri Aug 31 00:42:57 2012] Offset between fit and detection position for source 3 = 0.001672 pixels
[Fri Aug 31 00:42:57 2012] 107.896300 total counts/ 14.905300 bgd. counts: snr = 24.086326
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001672 pixels
  Position = (240.4, 275.2) = 3 9 40.63 -20 34 56.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 93.0 +/- 10.4
  Background counts = 14.9
  Rate = 0.002 +/- 0.0002
[Fri Aug 31 00:42:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:57 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:57 2012] Source does appear to be extended
[Fri Aug 31 00:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:47:00 2012] Not overwriting source region fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.reg
[Fri Aug 31 00:47:00 2012] Extracting stamp from image fullrun_ccd3_acisf10720_pi14-548_cl_sm2.00.img.gz, (221, 255) - (260, 295)
[Fri Aug 31 00:47:00 2012] Writing fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3.gif
[Fri Aug 31 00:47:15 2012] ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.evt and ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Aug 31 00:47:15 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.evt.gz[events] = 95 counts
[Fri Aug 31 00:47:15 2012] Mean chipx,y = (893.03, 810.28)
[Fri Aug 31 00:47:15 2012] Mean tdetx,y = (4321.72, 3954.03)
[Fri Aug 31 00:47:15 2012] chipx,y range = (877.00-911.00, 793.00-829.00)
[Fri Aug 31 00:47:15 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 9 counts
[Fri Aug 31 00:47:15 2012] ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.img and ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Aug 31 00:47:15 2012] ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.pi and ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Aug 31 00:47:15 2012] Not generating rmf since there are only 92 counts
[Fri Aug 31 00:47:19 2012] ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.lc and ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Aug 31 00:48:45 2012] 201.576
[Fri Aug 31 00:49:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:49:05 2012] Error reading totcts from fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Aug 31 00:49:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:49:05 2012] Using photon index=1.80, rate=0.00198, arf fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src3.arf
[Fri Aug 31 00:49:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:49:05 2012] Updating source flux to 2.3e-14
[Fri Aug 31 00:49:36 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting