[Fri Aug 31 00:40:47 2012] Detection parameters:
  Position = (585.3, 980.2) = 3 9 28.54 -20 29 9.7
  Extent = 1.9" x 1.1", rotation angle = 121 degrees
  Source counts = 18.2 +/- 4.7
  Background counts = 3.8
  Rate = 0.0004 +/- 0.0001

[Fri Aug 31 00:40:48 2012] Off-axis axis estimate = 7.55'
[Fri Aug 31 00:41:54 2012] Using EEF radius (= 2.52 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:41:54 2012] Initial guess for spatial extent in simple fitting = 2.52"
[Fri Aug 31 00:41:54 2012] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.954
[Fri Aug 31 00:41:54 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 2.52"
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16.csv
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16.csv
[Fri Aug 31 00:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:41:58 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Aug 31 00:41:58 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Aug 31 00:41:58 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Aug 31 00:42:13 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 29.829448 pixels away
[Fri Aug 31 00:42:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:13 2012] Assessing source extent using major
[Fri Aug 31 00:42:13 2012] Source does appear to be extended
[Fri Aug 31 00:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.75
[Fri Aug 31 00:42:13 2012] Source is asymmetric
[Fri Aug 31 00:42:40 2012] Using EEF radius (= 2.52 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:42:40 2012] Initial guess for spatial extent in simple fitting = 2.52"
[Fri Aug 31 00:42:40 2012] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.954
[Fri Aug 31 00:42:40 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 2.52"
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16.csv
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16.csv
[Fri Aug 31 00:42:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Aug 31 00:42:41 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Aug 31 00:42:57 2012] Spatial fit model total counts = 36.617200, observed total counts = 37.000000
[Fri Aug 31 00:42:57 2012] Offset between fit and detection position for source 29 = 4.290062 pixels
[Fri Aug 31 00:42:57 2012] 36.844300 total counts/ 11.062800 bgd. counts: snr = 7.751320
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.290062 pixels
  Position = (581.7, 982.5) = 3 9 28.68 -20 29 8.8
  Extent = 2.7 (1.4-4.2)", rotation angle = 0
  Source counts = 25.8 +/- 6.1
  Background counts = 11.1
  Rate = 0.0005 +/- 0.0001
[Fri Aug 31 00:42:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:57 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:57 2012] Source does appear to be extended
[Fri Aug 31 00:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:47:00 2012] Not overwriting source region fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.reg
[Fri Aug 31 00:47:00 2012] Extracting stamp from image fullrun_ccd3_acisf10720_pi14-548_cl_sm2.00.img.gz, (459, 860) - (704, 1105)
[Fri Aug 31 00:47:00 2012] Writing fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29.gif
[Fri Aug 31 00:47:56 2012] ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.evt and ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Fri Aug 31 00:47:56 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.evt.gz[events] = 42 counts
[Fri Aug 31 00:47:56 2012] Mean chipx,y = (135.12, 593.00)
[Fri Aug 31 00:47:56 2012] Mean tdetx,y = (4539.00, 3196.12)
[Fri Aug 31 00:47:56 2012] chipx,y range = (105.00-167.00, 563.00-632.00)
[Fri Aug 31 00:47:56 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 179 counts
[Fri Aug 31 00:47:56 2012] ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.img and ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Fri Aug 31 00:47:56 2012] ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.pi and ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Fri Aug 31 00:47:56 2012] Not generating rmf since there are only 25 counts
[Fri Aug 31 00:47:59 2012] ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.lc and ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Fri Aug 31 00:48:46 2012] 168.124
[Fri Aug 31 00:49:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:49:05 2012] Error reading totcts from fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29_src.pi.gz
[Fri Aug 31 00:49:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:49:05 2012] Using photon index=1.80, rate=0.000548, arf fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src29.arf
[Fri Aug 31 00:49:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:49:05 2012] Updating source flux to 7.7e-15
[Fri Aug 31 00:49:36 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting