[Fri Aug 31 00:40:46 2012] Detection parameters:
  Position = (224.1, 571.0) = 3 9 41.19 -20 32 31.1
  Extent = 0.6" x 0.5", rotation angle = 138 degrees
  Source counts = 58.2 +/- 7.7
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002

[Fri Aug 31 00:40:48 2012] Off-axis axis estimate = 3.10'
[Fri Aug 31 00:41:54 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:41:54 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Aug 31 00:41:54 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.352
[Fri Aug 31 00:41:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.60"
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:41:57 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Aug 31 00:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:41:58 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 31 00:41:58 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:41:58 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:42:13 2012] Spatial fit model total counts = 59.227700, observed total counts = 60.000000
[Fri Aug 31 00:42:13 2012] Offset between fit and detection position for source 16 = 0.820274 pixels
[Fri Aug 31 00:42:13 2012] 59.182890 total counts/ 4.444090 bgd. counts: snr = 25.965928
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.820274 pixels
  Position = (224.4, 571.7) = 3 9 41.19 -20 32 31.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 54.7 +/- 7.7
  Background counts = 4.4
  Rate = 0.001 +/- 0.0002
[Fri Aug 31 00:42:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:13 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:13 2012] Source does appear to be extended
[Fri Aug 31 00:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:42:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:42:40 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Aug 31 00:42:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.869
[Fri Aug 31 00:42:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.55"
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Aug 31 00:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:42:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10720_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 31 00:42:41 2012] fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:42:41 2012] Fit fullrun_ccd3_acisf10720_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:42:57 2012] Spatial fit model total counts = 57.258100, observed total counts = 60.000000
[Fri Aug 31 00:42:57 2012] Offset between fit and detection position for source 16 = 0.021460 pixels
[Fri Aug 31 00:42:57 2012] 57.103800 total counts/ 3.849300 bgd. counts: snr = 27.143474
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.021460 pixels
  Position = (224.4, 571.7) = 3 9 41.19 -20 32 31.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 53.3 +/- 7.6
  Background counts = 3.8
  Rate = 0.001 +/- 0.0002
[Fri Aug 31 00:42:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:57 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:57 2012] Source does appear to be extended
[Fri Aug 31 00:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:47:00 2012] Not overwriting source region fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.reg
[Fri Aug 31 00:47:00 2012] Extracting stamp from image fullrun_ccd3_acisf10720_pi14-548_cl_sm2.00.img.gz, (200, 548) - (248, 596)
[Fri Aug 31 00:47:00 2012] Writing fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16.gif
[Fri Aug 31 00:47:23 2012] ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.evt and ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Aug 31 00:47:23 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.evt.gz[events] = 56 counts
[Fri Aug 31 00:47:23 2012] Mean chipx,y = (605.64, 879.04)
[Fri Aug 31 00:47:23 2012] Mean tdetx,y = (4252.96, 3666.64)
[Fri Aug 31 00:47:23 2012] chipx,y range = (586.00-620.00, 860.00-905.00)
[Fri Aug 31 00:47:23 2012] Size of ../../acisf10720/products/events/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 5 counts
[Fri Aug 31 00:47:23 2012] ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.img and ../../acisf10720/products/images/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Aug 31 00:47:23 2012] ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.pi and ../../acisf10720/products/spectra/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Aug 31 00:47:23 2012] Not generating rmf since there are only 53 counts
[Fri Aug 31 00:47:27 2012] ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.lc and ../../acisf10720/products/lightcurves/fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Aug 31 00:48:45 2012] 191.498
[Fri Aug 31 00:49:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:49:05 2012] Error reading totcts from fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Aug 31 00:49:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:49:05 2012] Using photon index=1.80, rate=0.00113, arf fullrun_ccd3_acisf10720_pi14-548_pass1_cl_src16.arf
[Fri Aug 31 00:49:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:49:05 2012] Updating source flux to 1.4e-14
[Fri Aug 31 00:49:36 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting